Little Sahara dyno pulls and tunes w/specs. DYNO CHARTS inside.

Started by Gunz, October 26, 2009, 04:45:30 PM

Previous topic - Next topic

Gunz

4gunz



795cc
WK 54TB
Barker stage 2 head
+2 ferrea's
Beehive springs
Barker cam
12:5.1 JE piston
106 Cylinder
Balanced 6 mil Barker crank
Gigot Slingshot Lockout clutch
PC3
Dynatek nonprogrammable

Remember its just a trailbike, not some bullshit duner.




If you have a dyno graph from the rally post up and your complete motor build.




Dent Source LLC

941 +10 w/bar

Colorado700R


tonto13

Here are my runs from LS dyno day! Just want to give a public THANK YOU to DYNO MIKE for the great tune on my quad. He will have my recommendation from anyone who asks me. Thanks again Mike and Troy for getting us this hookup!!!



727cc
+3 KDS Racing T/B
FCI intake w/box
Dyna prog. ignition
PCIII
Stock Valve Bo White trail P/P
Web4 cam
Beehive springs
12:1 CP stock bore
+5 HotRods crank
Sparks pipe
Slingshot clutch
30hp. shot NX wet nitrous system
MSAWS= My Sh*t Always Works Sometimes!
"99% of life is what you make of it, so if your life sucks, YOU SUCK!!!"
-Mike Muir (aka Tonto)


Gunz

Troywcc vs 4gunz overlay.


This my bike graphed over Troy's RE stage 3 build.


.


Dent Source LLC

941 +10 w/bar

preddy08

Sure wish I could find mine from a couple of months ago  ???
Just a little 81hp trail bike.


Gunz

Troywcc dyno numbers.



Troy I need you build specs.
771cc
Racers Edge stage 3 head
WK 58TB
105.5 cylinder
5 mil hotrod
Slingshot


Dent Source LLC

941 +10 w/bar

Gunz

NaturalRaptor dyno results on his RE stage 1 head. Matt got a 26hp improvement on his tune. Autotune sucks and we have proof on multiple bikes. Hefe's 450 autotune worked fine.



We got the wrong graph, but Matt was getting a 69hp and a 58tq after the 20thish pull.

727cc
Racerz Edge Stage 1 head, with Ferra Plus 1 valves and springs
CP 10.75:1, 105mm piston
Stock Stroke
X4 cam
KDS +3 TB
PC5
FCI
Dynatek Programmable on #2
Pump Gas

.


Dent Source LLC

941 +10 w/bar

VelociRaptor

Theres more power to be had on tontos bike on the spray down low, you can see the drop in torque were the A/F jumps to 16:1. If ya can richen that part up theres another 2-3ftlbs there if not more.

Tim Barker

where is hefes dyno sheet  so you can make fun of his TQ figures.

Barkers Performance
www.barkersexhaust.com

Colorado700R

we made fun of his figure all right...looks like Elmer Fudd goes gay porn :lol:

Gunz

Quote from: Colorado700R on October 26, 2009, 09:05:49 PM
we made fun of his figure all right...looks like Elmer Fudd goes gay porn :lol:
:run: :run: :run:

Bo, Roy got another 7hp gain on the tune. His a/f without NOS was originally 15:1, they worked on his a/f for awhile.


Dent Source LLC

941 +10 w/bar

Kamakazi

tonto, you forgot to list your exhaust  ;) i like your choice of components though  :nod:
98% of north americans that hit the ditch say "oh shit", the other 2% are from saskatchewan and say "hold my beer and watch this"



Colorado700R


Gunz



Dent Source LLC

941 +10 w/bar

VelociRaptor

Tonto is also runnin my old stock valve port. I think his build is doin pretty good considering the combination.