Hmf on

Started by shookie, July 12, 2009, 05:46:14 PM

Previous topic - Next topic

shookie

Well i got it on a couple of days ago. When i start it, it will run for 30 seconds and then shut off. Its all good after that but after 30 min of riding with will somtimes just shut off. :help: Also after awile if i shut it off and turn it back on it dies then works next start??? any help
Thanks
2008 Raptor 700r SE
Hmf Ballance(black), PCV, Pro Design Foam,Maxxis razr 2 all the way around, Pro Taper SE Raptor Bend, ASV Levers, odi ROUGE lock on grips, Tusk Billet gas cap, Dr. D Reverse Lever, Rock A-arm guards, Rock nerfs
I Reject Your Reality And Substitute My Own

Peelz

PC3 idle settings? idle screw?

Didn't want to get the red one heh?

looks good.
Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"


shookie

Quote from: PeelsSE2 on July 12, 2009, 06:22:11 PM
PC3 idle settings? idle screw?

Didn't want to get the red one heh?

looks good.
I got the black so when i paint my frame black it matches :P I will try the idle. I will take my computer tomarrow and see what the idle is.
2008 Raptor 700r SE
Hmf Ballance(black), PCV, Pro Design Foam,Maxxis razr 2 all the way around, Pro Taper SE Raptor Bend, ASV Levers, odi ROUGE lock on grips, Tusk Billet gas cap, Dr. D Reverse Lever, Rock A-arm guards, Rock nerfs
I Reject Your Reality And Substitute My Own

Ranger

That's not a HMF? And have you looked at your idle speed in the PC software?

shookie

Quote from: Ranger on July 12, 2009, 07:09:32 PM
That's not a HMF? And have you looked at your idle speed in the PC software?
Yep its the ballance one made by hmf. Not yet. hoping tomarrow
2008 Raptor 700r SE
Hmf Ballance(black), PCV, Pro Design Foam,Maxxis razr 2 all the way around, Pro Taper SE Raptor Bend, ASV Levers, odi ROUGE lock on grips, Tusk Billet gas cap, Dr. D Reverse Lever, Rock A-arm guards, Rock nerfs
I Reject Your Reality And Substitute My Own

Gunz

Quote from: Ranger on July 12, 2009, 07:09:32 PM
That's not a HMF? And have you looked at your idle speed in the PC software?

:slap:


Dent Source LLC

941 +10 w/bar

Krandall

Quote from: 4gunz4x4z on July 12, 2009, 07:53:32 PM
Quote from: Ranger on July 12, 2009, 07:09:32 PM
That's not a HMF? And have you looked at your idle speed in the PC software?

:slap:

+1

:slap:  :rolleyes:

I'm guessing you'll need to richen up the idle settings a bit per DL700 it's 1250-2500


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

shookie

Quote from: Krandall on July 13, 2009, 08:44:33 AM
Quote from: 4gunz4x4z on July 12, 2009, 07:53:32 PM
Quote from: Ranger on July 12, 2009, 07:09:32 PM
That's not a HMF? And have you looked at your idle speed in the PC software?

:slap:

+1

:slap:  :rolleyes:

I'm guessing you'll need to richen up the idle settings a bit per DL700 it's 1250-2500
Thank you I dont think i will get to do it today :(
2008 Raptor 700r SE
Hmf Ballance(black), PCV, Pro Design Foam,Maxxis razr 2 all the way around, Pro Taper SE Raptor Bend, ASV Levers, odi ROUGE lock on grips, Tusk Billet gas cap, Dr. D Reverse Lever, Rock A-arm guards, Rock nerfs
I Reject Your Reality And Substitute My Own