Thoughts on these brake lines ???

[Colorado700R]

http://cgi.ebay.com/ebaymotors/SPEEDLINEZ-Yamaha-Raptor-700-Racing-Front-Brake-Lines_W0QQitemZ360153431247QQcmdZViewItemQQptZMotors_ATV_Parts_Accessories?hash=item53dad13ccf&_trksid=p4506.c0.m245&_trkparms=72%3A1205|65%3A12|39%3A1|240%3A1318

They don't use the front "T" section, they're a double line straight from the resi.  Sounds good in concept, thoughts?

Aaron

[Lady4Fiddy]

looks like a good deal, they are $74.95 new on speedlinez.com     

Sounds like it would be a good setup, but I am no genius on this subject.

[Krandall]

I've seen more than a few people running Speedlinez' or ones just like it where they arent using the T. Although I doubt the differences are big, I would bet that there's some advantage as far as braking power running single lines to each caliper.

[preddy08]

My buddy has these on his YFZ. Seems to work pretty well.

[Sand84]

How would we strap to upper arms?  Zip tie?  I want a set

[Colorado700R]

How would we strap to upper arms?  Zip tie?  I want a set

I was gonna see if the stock holder could use them   maybe with a few strategically placed zip ties

[Krandall]

That's how I have one of my lines connected on my a-arm (via zip tie)

you could buy 4 billet clamps 2 for each arm.

[preddy08]

If you get board go find a picture of what the predators use to hold the upper brake line. Thats what I've ben using since day one with my raptor.

[Krandall]

looks like.... A Piece of rubber w/ a ziptie. I've looked at a few predator pics too. your pics show it best it looks like.

[preddy08]

Not its a piece of plastic that snaps over the a-arm and is notched out for the brake line. I'll try to get a good pic of it tonight.

[Sand84]

That's how I have one of my lines connected on my a-arm (via zip tie)

you could buy 4 billet clamps 2 for each arm.

They make square clamps for stock arms?

[Sand84]

http://cgi.ebay.com/ebaymotors/ASR-Yamaha-Raptor-700-Racing-Front-Brake-Lines_W0QQitemZ360154778644QQcmdZViewItemQQptZMotors_ATV_Parts_Accessories?hash=item53dae5cc14&_trksid=p4506.c0.m245&_trkparms=65%3A10%7C39%3A1%7C240%3A1318

[preddy08]

Heres the predator clamp. Works just fine for me.

[Eagle700R]

I have this set up aand it works great for me...I used looms on my a arms i have only one pic of my quad and its old but you can kinda see what i used on the a arm if you look close.

[Krandall]

did you end up pulling the trigger on these suckas?