+3 stock swingarm picture's

Started by 1badazz_700r, February 18, 2009, 05:51:32 PM

Previous topic - Next topic
Print
Go Down Pages1 2
User actions

1badazz_700r

February 18, 2009, 05:51:32 PM
here are some pictures of an extended stock swingarm :thumbs:Looks like this should be the stock length. and very nice quality work

Just a little 778
105.5 WK cylinder CP 11:1
hotrods +5 crank
racersedge +2 head,with webb4
54mmTB with custom intake
sparks X-6exhaust
PC5/w autotune
dynatek programmable
slingshot lockup
+3 stock swingarm
hiper dual beadlocks/w gncc holeshots
flexx bars,burgard+2stem/w antivibe
ASV's
odi's

Out Back Welding

#1
February 18, 2009, 06:39:48 PM Last Edit: February 18, 2009, 06:51:18 PM by dpe_ele
freakin awesome i love this idea, i saw a +2 of one of these the other day, and i was thinkin hmmm i would like to do a +3 or 4

i was wondering, do they just add in a block? i would absolutely love some more details on this.

1badazz_700r

#2
February 18, 2009, 06:48:56 PM
they cut it behind the stock shock location and weld a piece in and reinforce the inside of the swingarm.Its very good quality work and looks factory

Just a little 778
105.5 WK cylinder CP 11:1
hotrods +5 crank
racersedge +2 head,with webb4
54mmTB with custom intake
sparks X-6exhaust
PC5/w autotune
dynatek programmable
slingshot lockup
+3 stock swingarm
hiper dual beadlocks/w gncc holeshots
flexx bars,burgard+2stem/w antivibe
ASV's
odi's

cowtownup

#3
February 18, 2009, 06:53:57 PM
That looks sick man... Sleeper fo sho...
Cowtown...
PCIII
Barker Duals
Pro Design with K&N Filter
Dynojet Ignition Module
Web Cam Stage 3
Diamond Piston (12.5 to 1)
+3 Throttle Body (KDS Racing)
Dynotune Nitrous Kit (Wet System)
SLC +6 Quadcustoms Ladder (PC's Black)
PRM Desert Grab Bar (PC'd Black)
CRJ Lowering Blocks (Front)

Livingmylife93

#4
February 18, 2009, 06:56:01 PM
Looks awesome  :thumbs:

exentix

#5
February 18, 2009, 07:40:45 PM
i agree with devan, it looks like this should be the stock length. looks great in person :thumbs:

russ-russ

#6
February 18, 2009, 09:28:37 PM
Who did this for you and will they do more?  Looks great BTW.

jonesi700r

#7
February 18, 2009, 09:38:37 PM
the more i see 'em, the more i want one. looks great!

Krandall

#8
February 18, 2009, 10:11:08 PM
We need this person on here!! AMAZING looking!


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

Blair

#9
February 18, 2009, 11:44:27 PM
Quote from: Krandall on February 18, 2009, 10:11:08 PM
We need this person on here!! AMAZING looking!

+1... i need to know more info...

this is one of those things that i would love to do... and i wouldnt tell people i did it... haha...
"The Difference Between Genius and Stupidity... Genius Has It's Limits"
"Scars are the Tattoo's of the Brave"
06 Raptor 700 SE - Pro Circuit T4 - PCIII - ASV Levers - AC Racing Nerfs - AC belly Skid (broken) - Holeshot XCR - Pro Taper Raptor Bend Bars - Pro-Tec Prefilter Airbox Lid - HID Headlights -

BRAD

#10
February 19, 2009, 06:53:31 AM
looks good man
2007 GYTR Raptor
ROCK series skids
Yoshimura RS7
Motoworks Fuel programmer-(Dobeck Style)
Holeshot HD tires

King of Bling

#11
February 19, 2009, 03:19:20 PM
Hello Everyone.

I am the hookup on stock swingarm extensions we can do any alluminum swingarm.
Most 3-4 inch a couple we can do 2inch just not on raptors.

We are doing them for a short time for $280 shipped back to you or $300 shipped back with skid plate holes drilled and tapped.


Let me know


Thanks Robert
It's easier to ask for forgiveness than permission! Buy now ask later!

Warren

#12
February 19, 2009, 04:52:21 PM
if you can do 3-4" why can't you do 2"?


by the way you do awesome work. those swingarms looks great.  :thumbs:
:( USED TO HAVE:
07 700R raptor SE (black & orange)
DG nerf bars (black, thanks bmust)
custom engine skid, and A-arm gaurds (Thanks bmust)
custom made grab bar & fender mounts (black)
tusk billet gas cap (black)
OMI stem mount
razr2's
Barkers (black)
PCIII
FCI with box
+3 TB

SprinterX

#13
February 19, 2009, 07:54:33 PM
Quote from: King of Bling on February 19, 2009, 03:19:20 PM
Hello Everyone.

I am the hookup on stock swingarm extensions we can do any alluminum swingarm.
Most 3-4 inch a couple we can do 2inch just not on raptors.

We are doing them for a short time for $280 shipped back to you or $300 shipped back with skid plate holes drilled and tapped.

Let me know

Thanks Robert
Top quality work here for sure.  :thumbs: I had mine done thru KofB on a GB on MR.
FWIW Tip: The rear skid plate mounts don't change but if you have the right drill and tap, save yourself the $20 and do the fwd skid plate mounts yourself.  ;)
08 Raptor 700

RE +1 head, X4 cam, TQS 11.5 piston, KDS +3 TB & evac, FCI,
Barkers duals, PC5 with A/T, Dyna Programmable, DL700 tune.
+2 I-Shock arms, Rock axle, reworked shocks, GTT link, +4 oem ext'd swinger
Elka Sys5 Dampner, Fasst Flexx on Rox anti-vibe risers, TT HIDs
Razr2 on HiPers, Skat 21/12/8 8pdl extremes, Sandstar frts
Roll bumper, PA guards/nerfs/skids

NaturalRaptor

#14
February 19, 2009, 08:12:03 PM
Quote from: warren on February 19, 2009, 04:52:21 PM
if you can do 3-4" why can't you do 2"?


by the way you do awesome work. those swingarms looks great.  :thumbs:

I had mine done thru KOB too! Great work and great guy. :thumbs:

The fabricator built a jig for the +4 and modified it just for the group buy to do a +3 too. If I remember correctly the fabricator stated that he felt the +2 would not give him enough room for internal bracing and strength would be lost.

I am glad you could join us King of Bling.  8)
It takes 43 muscle's to frown and 17 to smile, but only 3 for proper trigger pull.
Print
Go Up Pages1 2
User actions