I want to make a snorkel

Started by Livingmylife93, February 17, 2009, 07:03:55 PM

Previous topic - Next topic

Livingmylife93

I'm going down to Hatfield Mccoy again for spring break. I'll be riding with 2 Utilitys and want to stick with them in thwe mud (i got them everwhere else  :lol: ). Normally i do ok, and only get stuck in the real bad stuff, but alot of the time ill not go through a mudhole not because i'm worried about getting stuck, but because i think it will get too deep to fast.


Can you guys give me any cheap temporary intake snorkel ideas?


Call me crazy, but this is what i want lol.

Peelz

there is nothing you can buy, but good luck. not much room between seat and lid. You will have to start from scratch.
Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"


FoundArealQuad

just borrow a utility instead of F-ing up your Raptor
DMC Force 4s, PCIII, Mod Quad Intake, Flexx Bars, Alba Nerfs with Pro Pegs, Rox +2 adjustable risers, CCP, EHS airbox cover

dabigbratj

yea it will not help anything dont allways have to be right there through it all
the Merchant of Miscellanious Merchandise 

:swinger:

Peelz

let them get stuck, then ROOST EM!  lol
Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"


Krandall

Quote from: FoundArealQuad on February 17, 2009, 07:24:15 PM
just borrow a utility instead of F-ing up your Raptor

Bah.. You girls.



What I'D do is..... like they all said.. there isn't much room for making any sort of snorkel.. But.. if you have a single exhaust. I'd get soem PVC pipe and make it go to your left side and up. I'm not sure if there's room to make it go that way.... or if you remove your air box. and remove the rear under plastic. and have the tube go straight back off the intake tube.. then have it go straight up be hind you. (mounting the air filter on top) :thumbs:


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

dabigbratj

the Merchant of Miscellanious Merchandise 

:swinger:

FoundArealQuad

Quote from: Krandall on February 18, 2009, 10:06:22 AM
Quote from: FoundArealQuad on February 17, 2009, 07:24:15 PM
just borrow a utility instead of F-ing up your Raptor
:slap:

Bah.. You girls.



What I'D do is..... like they all said.. there isn't much room for making any sort of snorkel.. But.. if you have a single exhaust. I'd get soem PVC pipe and make it go to your left side and up. I'm not sure if there's room to make it go that way.... or if you remove your air box. and remove the rear under plastic. and have the tube go straight back off the intake tube.. then have it go straight up be hind you. (mounting the air filter on top) :thumbs:
DMC Force 4s, PCIII, Mod Quad Intake, Flexx Bars, Alba Nerfs with Pro Pegs, Rox +2 adjustable risers, CCP, EHS airbox cover

Krandall

You guys are making it sound like he's trying to run Nitrous just putting the bottle right into the intake or putting sand into his intake to port the head.  :lol:
???


I don't get what the problem is trying to fab up some sort of snorkle system? I'm just saying.. It's do-able.

Don't be negative nancies.  :lol:


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

zx10r203

Quote from: Krandall on February 18, 2009, 11:58:33 AM
You guys are making it sound like he's trying to run Nitrous just putting the bottle right into the intake or putting sand into his intake to port the head.  :lol:
???


I don't get what the problem is trying to fab up some sort of snorkle system? I'm just saying.. It's do-able.

Don't be negative nancies.  :lol:

+1

Removing the airbox should give you a lot of open room to run a pvc pipe straight back and up!
As you can see, there is a lot of open room under my air filter.

Peelz

never thought about having pipe come up the back. Just gotta make it go a bit higher than seat. GOod thought Krandall.
Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"


Out Back Welding

that would be sick  :lol:, id make it where i could switch it out with a normal setup, cus if u rolled it..yeah.

monster757

My approach is hammer down in 3rd and pull the front end up :D

Peelz

Quote from: monster757 on February 19, 2009, 02:33:37 PM
My approach is hammer down in 3rd and pull the front end up :D

+1

Then, while they are chugging through the mud, you skip across and roost the f**k out of them. :lol:
Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"


FoundArealQuad

That or go over the handle bars and splash them :lol:
DMC Force 4s, PCIII, Mod Quad Intake, Flexx Bars, Alba Nerfs with Pro Pegs, Rox +2 adjustable risers, CCP, EHS airbox cover