Plug Color ?

Started by 22Chet, May 23, 2008, 04:37:30 PM

Previous topic - Next topic

Colorado700R

Quote from: 22Chet on May 23, 2008, 05:29:06 PM
k. wish someone had a map for me haha ill shut the accel pump off tomorrow and do a few "trial" test runs when i put my air filter back on.

We can find you a map  :thumbs:  But we need to see what your current map is doing first.  The Accel pump is masking whether your map is correct or not.  Clean the plug, diable the AP, and ride the crap out of it for an hour or so.  Then do another plug chop.

Aaron

Colorado700R

People seem to think the Accel pump is a performance mod, IMO it's a band aid for a poor map. Some even use it when there map is already good, but they think it's gonna work like a double pumping carb.

not so.

22Chet

ok thanks for telling me i had no clue, i just remember when i got it i was getting maps off  www.:mad:.com and everyone was talking about turning accel pumps on so i turned mine on and forgot about it. I could take the laptop out right now and check the map i have and turn accel pump off, but how do i report what map i have ?
2006 Raptor 700
GYTR Exhaust
GYTR Intake
PCIII
15t Sprocket
TrailTech Vapor

Colorado700R

Quote from: 22Chet on May 23, 2008, 05:42:37 PM
ok thanks for telling me i had no clue, i just remember when i got it i was getting maps off  www.:mad:.com and everyone was talking about turning accel pumps on so i turned mine on and forgot about it. I could take the laptop out right now and check the map i have and turn accel pump off, but how do i report what map i have ?

Not at my laptop right now, so I can't look at the software, but I believe you can record the map from the PC3???

22Chet

#19
k im in the garage with the lap top hooked up to the PCIII i saved the map to the desktop and can email it to you if you would like to check it out. How do i turn Accel pump off all i see is where to adjust it, right now its set on 80/20/20... its one of the factory maps with GYTR Slip on, GYTR intake and Lid off.
2006 Raptor 700
GYTR Exhaust
GYTR Intake
PCIII
15t Sprocket
TrailTech Vapor

22Chet

i just turned the accel pump from 80/20/20 to 0/20/20 which should be the same as off correct ?
2006 Raptor 700
GYTR Exhaust
GYTR Intake
PCIII
15t Sprocket
TrailTech Vapor

Colorado700R

Quote from: 22Chet on May 23, 2008, 06:23:44 PM
i just turned the accel pump from 80/20/20 to 0/20/20 which should be the same as off correct ?
NO!!!!!!

That's adding fuel at zero throttle!!!!! take all numbers to zero!!!!

22Chet

they only go to 1...should i take them to 1 ?
2006 Raptor 700
GYTR Exhaust
GYTR Intake
PCIII
15t Sprocket
TrailTech Vapor

Colorado700R


Krandall

Quote from: Colorado700R on May 23, 2008, 06:42:50 PM
Quote from: 22Chet on May 23, 2008, 06:23:44 PM
i just turned the accel pump from 80/20/20 to 0/20/20 which should be the same as off correct ?
NO!!!!!!

That's adding fuel at zero throttle!!!!! take all numbers to zero!!!!

correct..
How the PC would interpert that is.. When the Throttle is 0% open add 20 somethin fuel and 20 something else  :lol:  (I know the first is throttle position at least :lol: :lol: :lol:


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

22Chet

k well i can change the first one to 0 so it would have to be 0/1/1
2006 Raptor 700
GYTR Exhaust
GYTR Intake
PCIII
15t Sprocket
TrailTech Vapor

22Chet

#26
k i turned the accel pump off and the map is still wrong cause if i blip the throttle from idle it stalls. should i lean just the begining of the map out of the whole thing ? Also how do u do that ?

EDIT
If i keep blipping it while idleing it will eventually kill it. So i put the stock exhaust and stock air filter with lid off map on and blipped it and it didnt stutter like usual and came up. But i know im running way lean so imma put the old map back on and try to lean the begining out somehow...
2006 Raptor 700
GYTR Exhaust
GYTR Intake
PCIII
15t Sprocket
TrailTech Vapor

Colorado700R

not sure, but with the second number to 1, the duration is set to every RPM, that could cause your problems, try taking the slide to 100.

Aaron

Kamakazi

when you have your dynojet screen up, there should be some top drop down menus, there is an option to disable the pump completely.
98% of north americans that hit the ditch say "oh shit", the other 2% are from saskatchewan and say "hold my beer and watch this"



ThisGuyAlex

black is too rich or burning oil...
sold the raptor....full on 05 yfz in progress...

stock parts: fuel tank, swingarm and rear shock