i need a quick answer on oil filters.....

Started by Warren, February 14, 2009, 08:07:49 AM

Previous topic - Next topic

Warren

where do you guys get your oil filters? i'm thinking there has got to be a cheaper place then the stealership. so where do you get them, what part number do you get, and how much do they cost?
:( USED TO HAVE:
07 700R raptor SE (black & orange)
DG nerf bars (black, thanks bmust)
custom engine skid, and A-arm gaurds (Thanks bmust)
custom made grab bar & fender mounts (black)
tusk billet gas cap (black)
OMI stem mount
razr2's
Barkers (black)
PCIII
FCI with box
+3 TB

GregKJ

I bought like 4 or so from an on-line vendor.  I can't even remember who it was.  Maybe RockyMountainATV while I was ordering other stuff.  I got the K & N brand.  I haven't researched price in a while, but RMATV's are HERE.

Warren

i found some for cheap at RMATV. has anybody ever ran these filters ?



:( USED TO HAVE:
07 700R raptor SE (black & orange)
DG nerf bars (black, thanks bmust)
custom engine skid, and A-arm gaurds (Thanks bmust)
custom made grab bar & fender mounts (black)
tusk billet gas cap (black)
OMI stem mount
razr2's
Barkers (black)
PCIII
FCI with box
+3 TB

Krandall

how much are they @ your sealership?  $3.50 here.  ???


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

Danny T

i pay about 7.50 for K N from RMATV. not sure about anything cheaper.

Warren

i bought 1 last night and it cost me $12. so what do you guys think about running those tusk filters.

Quote from: dmx434343 on February 14, 2009, 04:47:47 PM
i pay about 7.50 for K N from RMATV. not sure about anything cheaper.


how do you like these filters? had any problems with them yet?
:( USED TO HAVE:
07 700R raptor SE (black & orange)
DG nerf bars (black, thanks bmust)
custom engine skid, and A-arm gaurds (Thanks bmust)
custom made grab bar & fender mounts (black)
tusk billet gas cap (black)
OMI stem mount
razr2's
Barkers (black)
PCIII
FCI with box
+3 TB

dabigbratj

there are alot of people that like to run those tusk with no problems at all
the Merchant of Miscellanious Merchandise 

:swinger:

preddy08

I always get mine from NAPA. Its only a couple of bucks. WIX filters are some of the best out there.
Just a little 81hp trail bike.


Danny T






how do you like these filters? had any problems with them yet?

[/quote]
Quote from: warren on February 15, 2009, 05:59:37 AM
i bought 1 last night and it cost me $12. so what do you guys think about running those tusk filters.

Quote from: dmx434343 on February 14, 2009, 04:47:47 PM
i pay about 7.50 for K N from RMATV. not sure about anything cheaper.


how do you like these filters? had any problems with them yet?


i have been using then since i got the quad and never a problem, i change my oil & filter after every other gas tank:)

TeamYardsale

Are you serious?

Sometimes I go through 4 tanks a weekend, that means id have to change my oil 4 times in 2 weeks.
07 Yamaha Raptor 700 SE (Org/Blk)
GYTR Oval Race Pipe
GYTR Intake/Billet Adapter
GYTR Full Skids
Cobra Fi200r Fuel Programmer
ITP SS Wheels
Holeshot Tires

Livingmylife93

I get the tusk filters and never have a problem with them..

Warren

ok then i'm going to order a shit load of those tusk filters. thanks guys.  :thumbs:
:( USED TO HAVE:
07 700R raptor SE (black & orange)
DG nerf bars (black, thanks bmust)
custom engine skid, and A-arm gaurds (Thanks bmust)
custom made grab bar & fender mounts (black)
tusk billet gas cap (black)
OMI stem mount
razr2's
Barkers (black)
PCIII
FCI with box
+3 TB

r00st

Warren...NO! lol If you burn a lot of filters (and most of us that ride, DO!)

Get yourself one of these!

http://cgi.ebay.com/ebaymotors/700-Raptor-V-Star-Stainless-Steel-Oil-Filter_W0QQcmdZViewItemQQcategoryZ35595QQihZ005QQitemZ150327751265QQrdZ1QQsspagenameZWDVW

Apparently they went up in price...they used to (and I have seen it recently) list them for 27.99 with no reserve (and nobody usually bids) so you get it for 37.99 shipped. That is how i got mine. I originally bought a scotts stainless filter (Had one in my DS and loved it) for about 65...but then saw the ebay one for 27.99. I picked it up and returned the scotts because they filter the same micron level, and look literally identical (almost forgot which one was the scotts but it was labeled lol).

Save yourself in the long run on filter changes  8)
2007 Raptor 700 SE
With some SHTUFF

Warren

so do you just leave it in there for a few changes or what? i would think that it would loud up with shit if you didnt' change it at least everyother time.
:( USED TO HAVE:
07 700R raptor SE (black & orange)
DG nerf bars (black, thanks bmust)
custom engine skid, and A-arm gaurds (Thanks bmust)
custom made grab bar & fender mounts (black)
tusk billet gas cap (black)
OMI stem mount
razr2's
Barkers (black)
PCIII
FCI with box
+3 TB

r00st

Well you can leave it in for 1-2 changes if you wish but I always pull it out and clean it (usually every change, but I dont change my oil after 5 horus like a lot of you lol). To clean it all you have to do rinse it in some gasoline and you will see some tiny particles come out.

Then just make sure the gasoline has completely dried before re-installing. I do the filter first so it has time to dry by the time i get the oil drained out.
2007 Raptor 700 SE
With some SHTUFF