STEM SQUEaK!

Started by gr8ride4u2luv, January 12, 2009, 09:45:07 PM

Previous topic - Next topic

gr8ride4u2luv

ERMAHGERD, it was soooo annoying! The stem squeaks at every mm the steering is turned! What do I need to do to lube this and make it go away! :mad:
Barker In-Frame Duals
CP 11:1
Corrected Deck Height Cylinder
Hot Cam Stage III
KW HD Springs
Track Port & Polish by BO
+3 Throttle Body
Pro Design Intake w/ K&N
PCIII
Dynatek Prog. Ignition W/ Custom Curves
KDS Evac Valve
15T Front Sprocket
GNCC 22x7x10 Fronts
GNCC 21x11x9 Rears
Skat Trak Edge 22x11x10 Rear Paddles
TM Designworks Case Saver
TM Designworks Magnetic Oil Drain Plug
P

1badazz_700r

im not sure on this one. i would try putting some grease or lubricant in the stem bushing right in front of the gas tank.

Just a little 778
105.5 WK cylinder CP 11:1
hotrods +5 crank
racersedge +2 head,with webb4
54mmTB with custom intake
sparks X-6exhaust
PC5/w autotune
dynatek programmable
slingshot lockup
+3 stock swingarm
hiper dual beadlocks/w gncc holeshots
flexx bars,burgard+2stem/w antivibe
ASV's
odi's

double06

Quote from: 1badazz_700r on January 13, 2009, 05:40:57 AM
im not sure on this one. i would try putting some grease or lubricant in the stem bushing right in front of the gas tank.

Thats exactly what it it.  Did you replace the stem recently by any chance? 
I got a '06 with some KDS Racing bells and whistles  :grin_nod:

Temptation

Get the greasable steering stem mount, they are like $35 + and it eliminates it for a long,long time... Did mine.. :thumbs:


1badazz_700r

Where do you order the greasable one at?Im going to be doing a new stem and bars in a few weeks :thumbs:

Just a little 778
105.5 WK cylinder CP 11:1
hotrods +5 crank
racersedge +2 head,with webb4
54mmTB with custom intake
sparks X-6exhaust
PC5/w autotune
dynatek programmable
slingshot lockup
+3 stock swingarm
hiper dual beadlocks/w gncc holeshots
flexx bars,burgard+2stem/w antivibe
ASV's
odi's

Temptation



Krandall

thanks temp. I was trying to find that link this morning but couldnt find it! :clap:


I have the OMI on my rappy. I took the old one out and the plastic was worn to heck and the orings on top and bottom were worn out. the omi one is VERY sturdy and greasable. I filled mine up the first time and then when I had the hood off my rappy to put on the CF one. Didn't take much at all. Very pleased bars turn easy, and no damned squeeking! 8)


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

gr8ride4u2luv

Nope, the stem hasnt been replaced. And I would think it would be bad, its pretty new. I will take her apart and grease her for now until I get the greasable one. I spent all my money on nerf bars this month! :)
Barker In-Frame Duals
CP 11:1
Corrected Deck Height Cylinder
Hot Cam Stage III
KW HD Springs
Track Port & Polish by BO
+3 Throttle Body
Pro Design Intake w/ K&N
PCIII
Dynatek Prog. Ignition W/ Custom Curves
KDS Evac Valve
15T Front Sprocket
GNCC 22x7x10 Fronts
GNCC 21x11x9 Rears
Skat Trak Edge 22x11x10 Rear Paddles
TM Designworks Case Saver
TM Designworks Magnetic Oil Drain Plug
P

1badazz_700r

 :thumbs: thanks guys i will be getting me one those :rofl:

Just a little 778
105.5 WK cylinder CP 11:1
hotrods +5 crank
racersedge +2 head,with webb4
54mmTB with custom intake
sparks X-6exhaust
PC5/w autotune
dynatek programmable
slingshot lockup
+3 stock swingarm
hiper dual beadlocks/w gncc holeshots
flexx bars,burgard+2stem/w antivibe
ASV's
odi's

Bert

I know Karen would allow another Group Buy if 10 people were interested.

Superior product by far  :thumbs:

Blair

Quote from: Bert on January 13, 2009, 12:59:29 PM
I know Karen would allow another Group Buy if 10 people were interested.

Superior product by far  :thumbs:

if a group buy does come up im sure you could put me down for two...
"The Difference Between Genius and Stupidity... Genius Has It's Limits"
"Scars are the Tattoo's of the Brave"
06 Raptor 700 SE - Pro Circuit T4 - PCIII - ASV Levers - AC Racing Nerfs - AC belly Skid (broken) - Holeshot XCR - Pro Taper Raptor Bend Bars - Pro-Tec Prefilter Airbox Lid - HID Headlights -

Sand84

2009 Raptor 700- D7 :turbo: :satan:

Custom Carbon Creations

One stop shop for Carbon Covers for Raptor 700!!!

gr8ride4u2luv

I would be in for sure too!
Barker In-Frame Duals
CP 11:1
Corrected Deck Height Cylinder
Hot Cam Stage III
KW HD Springs
Track Port & Polish by BO
+3 Throttle Body
Pro Design Intake w/ K&N
PCIII
Dynatek Prog. Ignition W/ Custom Curves
KDS Evac Valve
15T Front Sprocket
GNCC 22x7x10 Fronts
GNCC 21x11x9 Rears
Skat Trak Edge 22x11x10 Rear Paddles
TM Designworks Case Saver
TM Designworks Magnetic Oil Drain Plug
P

Temptation

gr8ride4u2luv     Look what you started...LOL :rofl:


gr8ride4u2luv

Gotta love the simple posts. They get so off track.  :grin_nod:
Barker In-Frame Duals
CP 11:1
Corrected Deck Height Cylinder
Hot Cam Stage III
KW HD Springs
Track Port & Polish by BO
+3 Throttle Body
Pro Design Intake w/ K&N
PCIII
Dynatek Prog. Ignition W/ Custom Curves
KDS Evac Valve
15T Front Sprocket
GNCC 22x7x10 Fronts
GNCC 21x11x9 Rears
Skat Trak Edge 22x11x10 Rear Paddles
TM Designworks Case Saver
TM Designworks Magnetic Oil Drain Plug
P