91 chevy standard cab short box not 56k friendly

[Kamakazi]

well ive been working on this for a while, i was inspired while talking to uncle beaner one day, and decided to refresh my truck a little.  i rebuilt a 350 to 355, comp cams rv cam, kb flat top 9.5:1 pistons, eagle crank and rods, and rebuilt the heads.  ceramic 1-5/8 headers with a 3"flowmaster system and a 70 series muffler with custom welded mandrel bent y-pipe.ive replaced all u-joints and all front end parts.  stripped and painted the frame and all of the brake/tranny lines.  it is a tbi setup with an edelbrock tbi maniflod.  since im hoping to aproaching 300hp  ive bought an aftermarket fuel pump and a fuel regulator to get to 18psi fuel pressure.  im sure there are lots im leaving out but here are some pics.

[Krandall]

you should clean up that firewall paint her black. That will really make all of that purrrdy motor pop out!

looks good man, you'll really notice a difference once you drop that bad boy back in!

[Temptation]

Put your valve cover the other way, all in all that looks awesome...WOW

[Kamakazi]

lol, ya i put them on the wrong way when i took the pic, but ohwell.  thanks for your remarks i appreciate it, now i just need to get a bit more motivated and get it all wrapped up :grin_nod:

[UncleBeaner]

will a kick in the junk get you motivated? or drive down here and get your interior

[Kamakazi]

i didnt want beaner anywhere my junk, so this ones for u beaner

[wastednuts]

very nice 

[Kamakazi]

thanks, that wire loom takes a long time and is a pain in the ass, but so worth it :grin_nod:

[Kamakazi]

some more progress

[Flynbyu]

i was inspired while talking to uncle beaner one day

Oh my GERD.



~Brian

[UncleBeaner]

i was inspired while talking to uncle beaner one day

Oh my GERD.



~Brian

what can i say im the man

[UncleBeaner]

are you going to do the t-body mod? if you can scoop up a 88-90 454 t-body. trust who are you using to tune it. ive had good luck with pcmsforless.com cheap too

[Kamakazi]

i decided to go with 5.7 tbi injectors.  @18 psi i should have enough fuel to feed the beast.  i didnt want to go with a tune at first unless i need it, but if/when i do ill get a 56mm tb bore and run a programmer.  i have enough guages going into the truck to rival a nasa space shuttle, i should see quickly if i have fuel troubles of not.  thanks for the link though, ill check them out.

[Kamakazi]

update

[Krandall]

She's comin together well! You gettin excited yet?!