Raptor 660 Information > 660 Maintenance
Jetting that works
(1/1)
Flynbyu:
Please post your jet settings, and what works for you!
Location: Fort Smith, AR USA
Elevation: 466 feet above seal level (ASL)
Main jets: Mikuni 155 left carb, 160 right carb
Pilot jets: Mikuni 25
Needles: Stock
Mixture screw: 2.5 turns from full seated
Modifications: Yoshimura Full system, Airbox lid in place, snorkel modified.
~Brian
DECEPTiON21:
Location:Phoenix, AZ
Elevation:1200 ft
Jet Type: Mikuni mains and pilots, CT needles
Intake Mods:NO box, Pro-flow with K&N air filter
Exhaust Mods: CT Full System, 16 discs (as it comes from CT)
Porting/Motor Mods: None
Other: Crankcase Breather
Jetting
Pilots: 25
Fuel Screws: 2.75 for both
Needles: 3rd Clip
Mains: 170/175 L/R
Limited660:
This is mine :thumbs:
Navigation
[0] Message Index
Go to full version