Off Topic Bullsh*t Thread Volume X.IV

Started by Krandall, October 16, 2008, 09:03:07 AM

Previous topic - Next topic

Warren

Quote from: kyledvor61 on October 27, 2008, 03:40:48 PM
Quote from: warren on October 27, 2008, 03:39:47 PM
yeah but the stock is steel also. so it's not as soft. my new bar will be basically the same bar i have now just it won't be angled down like mine it will come straight out like the stock bar does. and the bar itself is going to be 1 1/4" outside diameter with 1/4" wall thickness. you think it will be ok?
just dont let peels ride it and you should be ok :thumbs:

:rofl: nice one. i'm riding with him at little sahara i'll have to keep that in mind. lol
:( USED TO HAVE:
07 700R raptor SE (black & orange)
DG nerf bars (black, thanks bmust)
custom engine skid, and A-arm gaurds (Thanks bmust)
custom made grab bar & fender mounts (black)
tusk billet gas cap (black)
OMI stem mount
razr2's
Barkers (black)
PCIII
FCI with box
+3 TB

Krandall

I would think 1/4" would be plenty.  :thumbs:


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

darkside94

make him give you an 80 dollar deposit for collateral  :thumbs:
The grammatically challenged's punching bag.

Warren

Quote from: Krandall on October 27, 2008, 03:45:10 PM
I would think 1/4" would be plenty.  :thumbs:

that's what i'm thinking too. thanks. i just wanted a second oppion.  even though i have already ordered the 1/4" thick stuff.  :rolleyes:



Quote from: darkside94 on October 27, 2008, 03:45:28 PM
make him give you an 80 dollar deposit for collateral  :thumbs:


lol
:( USED TO HAVE:
07 700R raptor SE (black & orange)
DG nerf bars (black, thanks bmust)
custom engine skid, and A-arm gaurds (Thanks bmust)
custom made grab bar & fender mounts (black)
tusk billet gas cap (black)
OMI stem mount
razr2's
Barkers (black)
PCIII
FCI with box
+3 TB

Peelz

Quote from: kyledvor61 on October 27, 2008, 03:40:48 PM
Quote from: warren on October 27, 2008, 03:39:47 PM
yeah but the stock is steel also. so it's not as soft. my new bar will be basically the same bar i have now just it won't be angled down like mine it will come straight out like the stock bar does. and the bar itself is going to be 1 1/4" outside diameter with 1/4" wall thickness. you think it will be ok?
just dont let peels ride it and you should be ok :thumbs:

hey miniprick!

he should let me ride it, "quality testing" :lol: :lol:


Later whores, peels out.
Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"


Warren

lol. ok i'll let you ride it. i guess i'll just make another one if it breaks. you'll have to wait until the last day of riding in case you do break it. lol



later man.
:( USED TO HAVE:
07 700R raptor SE (black & orange)
DG nerf bars (black, thanks bmust)
custom engine skid, and A-arm gaurds (Thanks bmust)
custom made grab bar & fender mounts (black)
tusk billet gas cap (black)
OMI stem mount
razr2's
Barkers (black)
PCIII
FCI with box
+3 TB

Flynbyu

2003 Yamaha Raptor





Yamaha Raptor Forum

shookie

2008 Raptor 700r SE
Hmf Ballance(black), PCV, Pro Design Foam,Maxxis razr 2 all the way around, Pro Taper SE Raptor Bend, ASV Levers, odi ROUGE lock on grips, Tusk Billet gas cap, Dr. D Reverse Lever, Rock A-arm guards, Rock nerfs
I Reject Your Reality And Substitute My Own

Flynbyu

2003 Yamaha Raptor





Yamaha Raptor Forum

shookie

 ??? hows work. I start damn drivers ed in like 20min
2008 Raptor 700r SE
Hmf Ballance(black), PCV, Pro Design Foam,Maxxis razr 2 all the way around, Pro Taper SE Raptor Bend, ASV Levers, odi ROUGE lock on grips, Tusk Billet gas cap, Dr. D Reverse Lever, Rock A-arm guards, Rock nerfs
I Reject Your Reality And Substitute My Own

Lady4Fiddy

Quote from: Colorado700R on October 27, 2008, 02:35:52 PM
I just got some guys in the elevator  :rofl:

I just did a Sitcom set-up,  Nikki made chilli last night and it has been having "Effects" on me since.  Well, I ran downstairs for a quick meeting, then decided to take the elevator back up to my floor after it was over.  I was all alone in the elevator, so I let one fly (This would have gagged maggots).  Feeling, better I exited the elevator and was walking away when two idiots (Air force Lt. Cols.) ran passed me rudely and jumped aboard the elevator just before it closed.  :grin_nod:

As I walked away with a grin from ear to ear all I could here was "Aww Man, What the F :mad:  ck!!!!!!"


It's gonna be a good day

:lol:  

See now arn't you glad I made the Chili. You thought it would kill me but it festered in your stomach all day and you got them two suckers and made many people laugh. Chili is GOOD!
Sticks and stones may break my bones but whips and chains excite me! >:D

kyledvor61

Quote from: shookie on October 27, 2008, 04:27:28 PM
??? hows work. I start damn drivers ed in like 20min
dont you take that when your 16 or something? i thought you were older than that

Flynbyu

Quote from: shookie on October 27, 2008, 04:27:28 PM
??? hows work. I start damn drivers ed in like 20min

Como?

Drivers Ed after school?

~Brian
2003 Yamaha Raptor





Yamaha Raptor Forum

Warren

well guys i'm out. talk to everyone later.
:( USED TO HAVE:
07 700R raptor SE (black & orange)
DG nerf bars (black, thanks bmust)
custom engine skid, and A-arm gaurds (Thanks bmust)
custom made grab bar & fender mounts (black)
tusk billet gas cap (black)
OMI stem mount
razr2's
Barkers (black)
PCIII
FCI with box
+3 TB

kyledvor61