What Aftermarket Carrier is everyone running?

[Sand84]

I'm looking at getting a RAD MFG carrier..   Should I get Tapered Bearing or Double Bearing Carrier?  Whats everyone running? 

Thanks

[SanDbUm]

I'm looking at getting a RAD MFG carrier..   Should I get Tapered Bearing or Double Bearing Carrier?  Whats everyone running? 

Thanks

I use dhy carrier, usually carries packages fast. 

[Sand84]

I'm looking at getting a RAD MFG carrier..   Should I get Tapered Bearing or Double Bearing Carrier?  Whats everyone running? 

Thanks

I use dhy carrier, usually carries packages fast. 

DHL    

[Bert]

Brad @ RPM Axle will machine your stock carrier to accept roller bearings   

[socalrappy700]

I have the modquad, love it so far.

[SanDbUm]

dhy is really aftermarket. 

[preddy08]

Don't forget that the stock piece is not a bad piece of work for being stock. It is twin row right from the factory

[Krandall]

If you can get the stock bearings out w/out having to have them pressed out. you'll get by cheaper, if you can't get them out. your better of going and buying the new one.. (from experience.)

[socalrappy700]

Don't forget that the stock piece is not a bad piece of work for being stock. It is twin row right from the factory

I thought it was a single row when I looked in mine.

[wobble]

It's double row. I just did mine not too long ago. Two separate bearings on each side (4 total).

[Krandall]

It's double row. I just did mine not too long ago. Two separate bearings on each side (4 total).

Yup. When I replaced mine. The outter left side was locked outter right was gritty. Inners were still like new.

[Sand84]

dhy is really aftermarket. 

LINK?

[SanDbUm]

www. .com

[Sand84]

www. .com

Nice

[SanDbUm]