Re: Off Topic Bullsh*t Thread Volume XI

Started by Flynbyu, September 15, 2008, 05:03:54 PM

Previous topic - Next topic

kyledvor61


darkside94

thats the only thing you can touch the pegs on huh
ok now i get it  :lol:
The grammatically challenged's punching bag.

dragonz

Quote from: kyledvor61 on September 21, 2008, 03:33:54 PM
i is an expert driver 8)

X is an unknown quantity
& a spert is a drip under pressure......................................... :rolleyes:

What are ya tryin to tell us :P
2003 Raptor 660LE
719cc with Kenz 13.5:1 piston
X-4 cam & no decomp
39mm FCR's
HV ported head
Ferrea SS Valves
CT Sonic Exhaust
GYTR Clutch

ASR +3+1 A-Arms & Works Tripple Rates
450 Front Calipers
+2 Extended Swingarm
G-Force Axle & Hubs.
Pro Armour Skid Plate
Tusk Nerfs


Gonna be a fun ride now!

700rSE

hey guys havent been on in some time. i got a question though, i have a 660 and so far ive only got to like 105km/h (thats like 65mph) and didnt if thats like a usual top speed? mayb its less cuz im like 215lbs.  also i got a friend with a 400 arctic cat sport quad and he says he can do 120, id be ashamed if i lost. so is there any way i can get more power/speed for cheap? thanks


also my reverse knob is loose and very tricky to get it to work, does anyone no how to fix it?

darkside94

um that raptor should be doing like 70  ???
sometimes it varies but check out some of the stuff like your air filter and make sure its cleaned out real good
and im not positive but i believe that articat 400 is a suzuki engine but i am definitely not sure
post this up in the raptor 700 section also if you havent already  :thumbs:
The grammatically challenged's punching bag.

dragonz

Quote from: 700rSE on September 21, 2008, 03:41:39 PM
hey guys havent been on in some time. i got a question though, i have a 660 and so far ive only got to like 105km/h (thats like 65mph) and didnt if thats like a usual top speed? mayb its less cuz im like 215lbs.  also i got a friend with a 400 arctic cat sport quad and he says he can do 120, id be ashamed if i lost. so is there any way i can get more power/speed for cheap? thanks


also my reverse knob is loose and very tricky to get it to work, does anyone no how to fix it?

105 - 110 km is about it for a stock rappy
plenty more to be had
pipe/filter/jets will gain you heaps, & there are some good value options out there.
I got a complete CT Sonic kit from Worldwide Performance

The CT pipe is good, cos if you have to hush things up a bit, you just take a few disks off the back of the pipe.
Very little loss in performance, but significantly quieter when needed

Loose knobs can be dangerous!
sugestions:
1/ just go forwards, its faster (more gears) & easier to control
2/ Check the mounting screws under the guard, to ensure that it is correctly mounted
3/ the knob pulls on a cable that actuates a lever low down on the left side of the gearbox
   Check the cable slides freely, & isn't too slack
4/ Check the lever that it pulls on to ensure it moves freely through out its range of motion

I think the arctic cat 400 has the same motor as the Suzi Z400
My wife has one & the rappy is 4-5k faster at full noise, but has better accelleration

Have fun
2003 Raptor 660LE
719cc with Kenz 13.5:1 piston
X-4 cam & no decomp
39mm FCR's
HV ported head
Ferrea SS Valves
CT Sonic Exhaust
GYTR Clutch

ASR +3+1 A-Arms & Works Tripple Rates
450 Front Calipers
+2 Extended Swingarm
G-Force Axle & Hubs.
Pro Armour Skid Plate
Tusk Nerfs


Gonna be a fun ride now!

kyledvor61

Quote from: darkside94 on September 21, 2008, 03:35:27 PM
thats the only thing you can touch the pegs on huh
ok now i get it  :lol:
i forgot to put the word boat in there :lol:

i is an expert boat driver 8)

dragonz

Quote from: kyledvor61 on September 21, 2008, 03:55:53 PM
Quote from: darkside94 on September 21, 2008, 03:35:27 PM
thats the only thing you can touch the pegs on huh
ok now i get it  :lol:
i forgot to put the word boat in there :lol:

i is an expert boat driver 8)
Is that "motorboat" :P
2003 Raptor 660LE
719cc with Kenz 13.5:1 piston
X-4 cam & no decomp
39mm FCR's
HV ported head
Ferrea SS Valves
CT Sonic Exhaust
GYTR Clutch

ASR +3+1 A-Arms & Works Tripple Rates
450 Front Calipers
+2 Extended Swingarm
G-Force Axle & Hubs.
Pro Armour Skid Plate
Tusk Nerfs


Gonna be a fun ride now!

darkside94

gearing is also a pretty inexpensive thing too
if you put a smaller rear sprocket on you will gain top speed but you will also loose a little torque
what kind of racing will you be doing
and also what if anything have you done too your quad already
The grammatically challenged's punching bag.

darkside94

Quote from: dragonz on September 21, 2008, 03:57:26 PM
Quote from: kyledvor61 on September 21, 2008, 03:55:53 PM
Quote from: darkside94 on September 21, 2008, 03:35:27 PM
thats the only thing you can touch the pegs on huh
ok now i get it  :lol:
i forgot to put the word boat in there :lol:

i is an expert boat driver 8)
Is that "motorboat" :P
dragonz if he motorboats in someones ass is that the same thing
or is it then called motorbutt?
The grammatically challenged's punching bag.

kyledvor61

Quote from: dragonz on September 21, 2008, 03:57:26 PM
Quote from: kyledvor61 on September 21, 2008, 03:55:53 PM
Quote from: darkside94 on September 21, 2008, 03:35:27 PM
thats the only thing you can touch the pegs on huh
ok now i get it  :lol:
i forgot to put the word boat in there :lol:

i is an expert boat driver 8)
Is that "motorboat" :P
that too :grin_nod: :clap:

dragonz

Quote from: darkside94 on September 21, 2008, 03:58:29 PM
Quote from: dragonz on September 21, 2008, 03:57:26 PM
Quote from: kyledvor61 on September 21, 2008, 03:55:53 PM
Quote from: darkside94 on September 21, 2008, 03:35:27 PM
thats the only thing you can touch the pegs on huh
ok now i get it  :lol:
i forgot to put the word boat in there :lol:

i is an expert boat driver 8)
Is that "motorboat" :P

dragonz if he motorboats in someones ass is that the same thing
or is it then called motorbutt?

Definately!
Maybe you should "butt out" for him & see............ ::)
2003 Raptor 660LE
719cc with Kenz 13.5:1 piston
X-4 cam & no decomp
39mm FCR's
HV ported head
Ferrea SS Valves
CT Sonic Exhaust
GYTR Clutch

ASR +3+1 A-Arms & Works Tripple Rates
450 Front Calipers
+2 Extended Swingarm
G-Force Axle & Hubs.
Pro Armour Skid Plate
Tusk Nerfs


Gonna be a fun ride now!

darkside94

naa but if you can relay that message to exentix kyle just might get his head out of "his" ass  :rofl:
The grammatically challenged's punching bag.

darkside94

The grammatically challenged's punching bag.

kyledvor61