radiator has a hole in it. what to do?

Started by Warren, August 22, 2008, 06:21:50 PM

Previous topic - Next topic

Warren

my buddy and i where riding down a gravel road and he was ahead of me and throwing rocks back. well one hit my radiator just right and punched a hole in it. what should i do....


1) call the dealership and see if it's covered on warranty?

2) call the dealership and buy a new one?

3) take it to work with me and try to TIG weld the broken vein?

4) take it to a radiator shop?

what do you guys think?
:( USED TO HAVE:
07 700R raptor SE (black & orange)
DG nerf bars (black, thanks bmust)
custom engine skid, and A-arm gaurds (Thanks bmust)
custom made grab bar & fender mounts (black)
tusk billet gas cap (black)
OMI stem mount
razr2's
Barkers (black)
PCIII
FCI with box
+3 TB

Sand84

1 and 2 shoud not have even crossed your mind :lol:    I'm not sure I'd prolly call a radiator shop and see what they say.. 
2009 Raptor 700- D7 :turbo: :satan:

Custom Carbon Creations

One stop shop for Carbon Covers for Raptor 700!!!

dick-84

I would take it to a radiator shop and see what it will cost.  :thumbs:

preddy08

Quote from: dick-84 on August 22, 2008, 07:46:13 PM
I would take it to a radiator shop and see what it will cost.  :thumbs:

I had a radiator out of my mustang fixed for 35 bucks. I would go that route.
Just a little 81hp trail bike.


Peelz

Quote from: preddy08 on August 22, 2008, 11:13:30 PM
Quote from: dick-84 on August 22, 2008, 07:46:13 PM
I would take it to a radiator shop and see what it will cost.  :thumbs:

I had a radiator out of my mustang fixed for 35 bucks. I would go that route.

+1 used to do that all the time.

and your sig is even better now! :rofl:
Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"


kyledvor61

Quote from: Peels660 on August 23, 2008, 12:39:27 AM
Quote from: preddy08 on August 22, 2008, 11:13:30 PM
Quote from: dick-84 on August 22, 2008, 07:46:13 PM
I would take it to a radiator shop and see what it will cost.  :thumbs:

I had a radiator out of my mustang fixed for 35 bucks. I would go that route.

+1 used to do that all the time.

and your sig is even better now! :rofl:
:rofl: :rofl: :rofl: :rofl:

Warren

#6
Quote from: Peels660 on August 23, 2008, 12:39:27 AM
Quote from: preddy08 on August 22, 2008, 11:13:30 PM
Quote from: dick-84 on August 22, 2008, 07:46:13 PM
I would take it to a radiator shop and see what it will cost.  :thumbs:

I had a radiator out of my mustang fixed for 35 bucks. I would go that route.

+1 used to do that all the time.



you used to fix radiators or you used to get them fixed?


and i called 2 different dealerships. apparently you have to buy the fan and radiator all together and the one dealership said it would be $471 and the other said it would be $504  ::) ::) ::) ::) ::) damnit i thought they would be cheaper. does anyone make a good aftermarket one for cheaper then this?
:( USED TO HAVE:
07 700R raptor SE (black & orange)
DG nerf bars (black, thanks bmust)
custom engine skid, and A-arm gaurds (Thanks bmust)
custom made grab bar & fender mounts (black)
tusk billet gas cap (black)
OMI stem mount
razr2's
Barkers (black)
PCIII
FCI with box
+3 TB

Bert

PWR
PWR5494 Raptor 700 06-08 $449
http://www.pwr-performance.com/atv.htm
Hopefully yours is fixable or check with a sponsor for a better price.
I would also consider a used one from ebay or a forum member.


Warren

i'm looking on ebay now. and i have a wanted ad up in the classified. i hope someone can help me out here. this shit couldn't have happened at a worse time with the silver lake trip just around the corner.  :mad: :mad: :mad: :mad:
:( USED TO HAVE:
07 700R raptor SE (black & orange)
DG nerf bars (black, thanks bmust)
custom engine skid, and A-arm gaurds (Thanks bmust)
custom made grab bar & fender mounts (black)
tusk billet gas cap (black)
OMI stem mount
razr2's
Barkers (black)
PCIII
FCI with box
+3 TB

darkside94

if i was you i would kick your friends ass  :box:
The grammatically challenged's punching bag.

Bert

I don't think you have anything to worry about Warren, I bet it can be fixed for cheap if you find the right repair man  ???

Warren

Quote from: darkside94 on August 23, 2008, 10:24:58 AM
if i was you i would kick your friends ass  :box:

he didn't mean to do it. i mean he wasn't fish tailing or anything he was just hauling ass up in front of me.


i found a PWR radiator on ebay for $399 is that a good deal?
:( USED TO HAVE:
07 700R raptor SE (black & orange)
DG nerf bars (black, thanks bmust)
custom engine skid, and A-arm gaurds (Thanks bmust)
custom made grab bar & fender mounts (black)
tusk billet gas cap (black)
OMI stem mount
razr2's
Barkers (black)
PCIII
FCI with box
+3 TB

preddy08

Quote from: warren on August 23, 2008, 10:28:37 AM
Quote from: darkside94 on August 23, 2008, 10:24:58 AM
if i was you i would kick your friends ass  :box:

he didn't mean to do it. i mean he wasn't fish tailing or anything he was just hauling ass up in front of me.


i found a PWR radiator on ebay for $399 is that a good deal?

I was going to sugest the PWR radiator. They are a GOOD company that makes larger radiator that is suppose to drop the temps 10* or so. I would buy that before a stocker any day. First I would try to have it fixed for cheap.
Just a little 81hp trail bike.


Flynbyu

Definitely call a radiator shop.

Your repair costs would be minimal vs. replacing it with a new one.

Second, invest in a radiator grill cover. I spent $20.00 on the one I bought.

~Brian
2003 Yamaha Raptor





Yamaha Raptor Forum