Crank

[socalrappy700]

If you have to add a 1/2" spacer to the cylinder then how does the motor still fit in the frame. Do you have to mod the top motor mounts or what?

I have no clue.  I'm still learning about these builds. 

Powder coater can tell us...he's got the 12mm long rod. Oh Paul....

He spent all that money just to chase you down. 

[SUB454]

If you have to add a 1/2" spacer to the cylinder then how does the motor still fit in the frame. Do you have to mod the top motor mounts or what?

I have no clue.  I'm still learning about these builds. 

Powder coater can tell us...he's got the 12mm long rod. Oh Paul....

He spent all that money just to chase you down. 

Yes, he did. He got the best of me at Sandfest. It should have been me and him in the final, but I launched in the WRONG gear on the first race and "red-lighted" in the 2nd. 2 strike's and my day was over. :'( His bike hauls AZZ.

[powder coater]

Subs quad rarely leaves the barn. Yes the top motor mount needs to be re drilled but there is still plenty of room. I also think ver a period of time these will last longer before cylinder wall distortion becomes a problem. As far as reliability the current 8mm stroke motors have been very reliable. Its to soon to say how long they will run. The long rod give you more options for running down the Kenz 797.

[SUB454]

Subs quad rarely leaves the barn. Yes the top motor mount needs to be re drilled but there is still plenty of room. I also think ver a period of time these will last longer before cylinder wall distortion becomes a problem. As far as reliability the current 8mm stroke motors have been very reliable. Its to soon to say how long they will run. The long rod give you more options for running down the Kenz 797.

Stay tuned peep's....we'll be doing some 300ft racing next month. THEN, I'm burning the flag that Paul has on his bike.

[socalrappy700]

Subs quad rarely leaves the barn. Yes the top motor mount needs to be re drilled but there is still plenty of room. I also think ver a period of time these will last longer before cylinder wall distortion becomes a problem. As far as reliability the current 8mm stroke motors have been very reliable. Its to soon to say how long they will run. The long rod give you more options for running down the Kenz 797.

Stay tuned peep's....we'll be doing some 300ft racing next month. THEN, I'm burning the flag that Paul has on his bike.

What does the flag say?  "kenzboy's butts drive me nuts"?

[SUB454]

Subs quad rarely leaves the barn. Yes the top motor mount needs to be re drilled but there is still plenty of room. I also think ver a period of time these will last longer before cylinder wall distortion becomes a problem. As far as reliability the current 8mm stroke motors have been very reliable. Its to soon to say how long they will run. The long rod give you more options for running down the Kenz 797.

Stay tuned peep's....we'll be doing some 300ft racing next month. THEN, I'm burning the flag that Paul has on his bike.

What does the flag say?  "kenzboy's butts drive me nuts"?

I'm sure Paul would be proud to post a picture of it....he has no shame. I went to dinner at his place last weekend. As soon as I walked in the front door, I saw his 2 trophys from Sandfest. Those RF boys love to rub it in

[socalrappy700]

Subs quad rarely leaves the barn. Yes the top motor mount needs to be re drilled but there is still plenty of room. I also think ver a period of time these will last longer before cylinder wall distortion becomes a problem. As far as reliability the current 8mm stroke motors have been very reliable. Its to soon to say how long they will run. The long rod give you more options for running down the Kenz 797.

Stay tuned peep's....we'll be doing some 300ft racing next month. THEN, I'm burning the flag that Paul has on his bike.

What does the flag say?  "kenzboy's butts drive me nuts"?

I'm sure Paul would be proud to post a picture of it....he has no shame. I went to dinner at his place last weekend. As soon as I walked in the front door, I saw his 2 trophys from Sandfest. Those RF boys love to rub it in

If we could just get a certain kenz boy to learn how to start.



Where is mister learn to launch (aka Grant) to tell us how its done. 

[SUB454]

Subs quad rarely leaves the barn. Yes the top motor mount needs to be re drilled but there is still plenty of room. I also think ver a period of time these will last longer before cylinder wall distortion becomes a problem. As far as reliability the current 8mm stroke motors have been very reliable. Its to soon to say how long they will run. The long rod give you more options for running down the Kenz 797.

Stay tuned peep's....we'll be doing some 300ft racing next month. THEN, I'm burning the flag that Paul has on his bike.

What does the flag say?  "kenzboy's butts drive me nuts"?

I'm sure Paul would be proud to post a picture of it....he has no shame. I went to dinner at his place last weekend. As soon as I walked in the front door, I saw his 2 trophys from Sandfest. Those RF boys love to rub it in

If we could just get a certain kenz boy to learn how to start.



Where is mister learn to launch (aka Grant) to tell us how its done. 

He still has to learn to hold the throttle WIDE OPEN, THEN let the clutch out. It's such a rush to have it bouncing off the rev limiter and let the clutch go...I'm hooked.

[socalrappy700]

That must be quite the rush.  I still have to look into my next build.  I don't plan on turning this into a "hill only" bike.  But I have the power hungry bug.

[powder coater]

Here you go.

[attachment deleted by admin]

[Krandall]

Here you go.

[socalrappy700]

Here you go.

So how much did it cost to make him your bitch?

[RaptorRandy]

Its to soon to say how long they will run. The long rod give you more options for running down the Kenz 797.

Shit....you still need to run down the old man on the wore out lil 780 with your ass onboard your own bike, before you start after the 797's  :grin_nod:

[socalrappy700]

Its to soon to say how long they will run. The long rod give you more options for running down the Kenz 797.

Shit....you still need to run down the old man on the wore out lil 780 with your ass onboard your own bike, before you start after the 797's  :grin_nod:

damn old man is a light weight now.  I think I'll send you a few chicago style pizzas before I line up against you.

[RaptorRandy]

Its to soon to say how long they will run. The long rod give you more options for running down the Kenz 797.

Shit....you still need to run down the old man on the wore out lil 780 with your ass onboard your own bike, before you start after the 797's  :grin_nod:

damn old man is a light weight now.  I think I'll send you a few chicago style pizzas before I line up against you.