Shout Box

...loading shoutbox...











Author Topic: '07 Raptor 700 parts blowout!!!!  (Read 2701 times)

Offline richw3533

  • Newbie
  • *
  • Posts: 62
  • Street Cred: 2
    • Email
'07 Raptor 700 parts blowout!!!!
« on: July 15, 2008, 08:22:38 PM »
I need to sell it all for the next build so I have reduced the motor to $1100 (negotiable), and the rest of the parts are going to.  I will separate the motor if people are interested.  I am picking up the shipping for the USA buyers.  If you are outside the USA we can work something out.

All parts are negotiable  Paypal is richw3533@comcast.net

I can send pictures of any part upon request!!!!!!

ecu - $100 shipped
New Trinity Racing fuel management system - $200 shipped
Like New Houser Racing - +2 regular travel a-arms - $500 shipped
Kenny's CC evac valve - $140 shipped
CFM - polished oil tank - $120 shipped
CFM - polished airbox w/ oversized UNI filter - $120 shipped
CFM - over flow protector - $20 shipped
Stock ’07 front shocks - $50 shipped
909 handle bars w/ grips - $50 shipped
powder coated motor mounts - (set of all 3) trans red - $20 shipped
powder coated brake rotor hub - trans red - $50 shipped
powder coated axle nut - trans red - $15 shipped
powder coated axle nut - black - $15 shipped
powder coated brake caliper mount - trans red - $35 shipped
polished brake caliper mount - $35 shipped
Modquad red round ebrake block off - $15 shipped
Modquad red front sprocket cover - $30 shipped
Krause Racing high strength 520 o-ring racing chain - $125 shipped
New Pro Armor pro race grab bar powdered black - $100 shipped
extra water pump outer - $20 shipped
like new PRM .25 swinger skid plate - $125 shipped
new PRM 6 pack rack - $100 shipped
new extra water pump - $100 shipped
new rear 30t sprocket and hub - $100 shipped
new rear 28t sprocket and hub - $150 shipped
new extra rectifier - $40 shipped
new +6 braided brake line - $50 shipped
new extra clutch cables - 2ea. - $25 shipped ea.
extra wire harness (has a couple plugs missing) - $25 shipped
like new axle - $50 shipped
new upper motor mount with bolts - $8 shipped
new timing cover - will polish - $35 shipped
2 - oil filter covers - will polish - $20 each shipped
3 - fuel tanks - $40 each shipped
2 - fuel pumps - $75 each shipped














« Last Edit: July 22, 2008, 03:10:32 PM by richw3533 »
Go Big or Go Home....Trick it out to the max!

'08 Hollywood-Racing Diablo Venom
'09 Hollywood-Racing Diablo Roadster (coming soon)

Offline air

  • Jr. Member
  • **
  • Posts: 246
  • Street Cred: 4
    • The Utah ATV Association
Re: '07 Raptor 700 parts blowout!!!!
« Reply #1 on: July 15, 2008, 08:45:34 PM »
I am interested in the oil tank and side Kenny's CC evac valve (side cover)
Rusty


Offline richw3533

  • Newbie
  • *
  • Posts: 62
  • Street Cred: 2
    • Email
Re: '07 Raptor 700 parts blowout!!!!
« Reply #2 on: July 15, 2008, 08:53:51 PM »
I am interested in the oil tank and side Kenny's CC evac valve (side cover)
The oil tank comes polished and the side cover comes with the proper modifications to keep it clean.
Oil tank - $120 shipped
Case cover - $140 shipped
« Last Edit: July 15, 2008, 08:57:06 PM by richw3533 »
Go Big or Go Home....Trick it out to the max!

'08 Hollywood-Racing Diablo Venom
'09 Hollywood-Racing Diablo Roadster (coming soon)

Offline tonto13

  • Spraya Playa
  • Wizard Of No2
  • Full Member
  • *
  • Posts: 351
  • Street Cred: 10
Re: '07 Raptor 700 parts blowout!!!!
« Reply #3 on: July 15, 2008, 10:24:09 PM »
Want dr,d and 38 black sprocket
MSAWS= My Sh*t Always Works Sometimes!
"99% of life is what you make of it, so if your life sucks, YOU SUCK!!!"
-Mike Muir (aka Tonto)


Offline Colorado700R

  • Always the big spoon!
  • Admin Pimp
  • Hero Member
  • *****
  • Posts: 15250
  • Street Cred: 50
  • Carpe Cerevisi!!! (Sieze the beer!!)
    • Email
Re: '07 Raptor 700 parts blowout!!!!
« Reply #4 on: July 15, 2008, 10:28:54 PM »
Rich, you don't happen to have a sub-frame laying around do you?


Aaron



Offline richw3533

  • Newbie
  • *
  • Posts: 62
  • Street Cred: 2
    • Email
Re: '07 Raptor 700 parts blowout!!!!
« Reply #5 on: July 16, 2008, 06:11:00 AM »
Want dr,d and 38 black sprocket
Paypal is listed above, they are yours.
Go Big or Go Home....Trick it out to the max!

'08 Hollywood-Racing Diablo Venom
'09 Hollywood-Racing Diablo Roadster (coming soon)

Offline richw3533

  • Newbie
  • *
  • Posts: 62
  • Street Cred: 2
    • Email
Re: '07 Raptor 700 parts blowout!!!!
« Reply #6 on: July 16, 2008, 06:11:20 AM »
Rich, you don't happen to have a sub-frame laying around do you?


Aaron



I might...
Go Big or Go Home....Trick it out to the max!

'08 Hollywood-Racing Diablo Venom
'09 Hollywood-Racing Diablo Roadster (coming soon)

Offline Colorado700R

  • Always the big spoon!
  • Admin Pimp
  • Hero Member
  • *****
  • Posts: 15250
  • Street Cred: 50
  • Carpe Cerevisi!!! (Sieze the beer!!)
    • Email
Re: '07 Raptor 700 parts blowout!!!!
« Reply #7 on: July 16, 2008, 09:06:28 AM »
Rich, you don't happen to have a sub-frame laying around do you?


Aaron



I might...


Do You "might" wanna sell it?

 :lol:

Offline machelis

  • VIP
  • Jr. Member
  • *
  • Posts: 218
  • Street Cred: 0
Re: '07 Raptor 700 parts blowout!!!!
« Reply #8 on: July 16, 2008, 11:57:12 AM »
The parts you're selling are only the added/modified parts, or are you parting out the whole bike?

Still looking for a rad  :(

p.s could you post of pics of those +2 arms please?

Offline richw3533

  • Newbie
  • *
  • Posts: 62
  • Street Cred: 2
    • Email
Re: '07 Raptor 700 parts blowout!!!!
« Reply #9 on: July 16, 2008, 01:06:07 PM »
Rich, you don't happen to have a sub-frame laying around do you?


Aaron



I might...


Do You "might" wanna sell it?

 :lol:
I just went to the shop and I don't have the extra one sitting around.  If I find it, it is yours!!
Go Big or Go Home....Trick it out to the max!

'08 Hollywood-Racing Diablo Venom
'09 Hollywood-Racing Diablo Roadster (coming soon)

Offline richw3533

  • Newbie
  • *
  • Posts: 62
  • Street Cred: 2
    • Email
Re: '07 Raptor 700 parts blowout!!!!
« Reply #10 on: July 16, 2008, 01:08:01 PM »
The parts you're selling are only the added/modified parts, or are you parting out the whole bike?

Still looking for a rad  :(

p.s could you post of pics of those +2 arms please?
Almost the whole bike is going.  I have to rebuild it for the next R1 project so all of the parts listed are the parts I either have to build myself or buy engine suited specific parts.

Here is a pic of the a-arms


Go Big or Go Home....Trick it out to the max!

'08 Hollywood-Racing Diablo Venom
'09 Hollywood-Racing Diablo Roadster (coming soon)

Offline Colorado700R

  • Always the big spoon!
  • Admin Pimp
  • Hero Member
  • *****
  • Posts: 15250
  • Street Cred: 50
  • Carpe Cerevisi!!! (Sieze the beer!!)
    • Email
Re: '07 Raptor 700 parts blowout!!!!
« Reply #11 on: July 16, 2008, 01:15:12 PM »
Rich, you don't happen to have a sub-frame laying around do you?


Aaron



I might...


Do You "might" wanna sell it?

 :lol:
I just went to the shop and I don't have the extra one sitting around.  If I find it, it is yours!!

Cool, Mine is snapped  :mad:

Offline machelis

  • VIP
  • Jr. Member
  • *
  • Posts: 218
  • Street Cred: 0
Re: '07 Raptor 700 parts blowout!!!!
« Reply #12 on: July 17, 2008, 12:38:00 AM »
The parts you're selling are only the added/modified parts, or are you parting out the whole bike?

Still looking for a rad  :(

p.s could you post of pics of those +2 arms please?
Almost the whole bike is going.  I have to rebuild it for the next R1 project so all of the parts listed are the parts I either have to build myself or buy engine suited specific parts.

Here is a pic of the a-arms




So that means the rad is for sale?  :confused:

Sorry, still a little brain dead from work  ???

Offline richw3533

  • Newbie
  • *
  • Posts: 62
  • Street Cred: 2
    • Email
Re: '07 Raptor 700 parts blowout!!!!
« Reply #13 on: July 18, 2008, 04:02:57 AM »
This was not a total tear down and sell, I was just selling the parts I was not going to need for the next build.

I will be adding more parts to the list as I go through my shop.  We are gearing up to start production of the R1 bikes as I have 5 orders for them right now.

I will respond to everyones PM's.
« Last Edit: July 18, 2008, 01:50:15 PM by richw3533 »
Go Big or Go Home....Trick it out to the max!

'08 Hollywood-Racing Diablo Venom
'09 Hollywood-Racing Diablo Roadster (coming soon)

Offline Krandall

  • Führer
  • SiteAdmin
  • Hero Member
  • *****
  • Posts: 36323
  • Street Cred: 1337
  • Dracus II
    • Yamaha Raptor Forum
    • Email
Re: '07 Raptor 700 parts blowout!!!!
« Reply #14 on: July 18, 2008, 09:42:18 AM »
This was not a total tear down and sell, I was just selling the parts I was not going to need for the next build.

I had a guy come to my shop and buy everything yesterday early afternoon, so keep looking for what is left.  I will be adding more parts to the list as I go through my shop.  We are gearing up to start production of the R1 bikes as I have 5 orders for them right now.

I will respond to everyones PM's.


Damn. Congrats on gettin your name out there Rich. You have a very unique talent! keep at it man!
-Randy


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once