Pro Armor Nerf Bars

Started by machelis, March 02, 2010, 03:06:57 PM

Previous topic - Next topic

machelis

I was just looking through the new DirtWheels and saw an add for the new Pro Armor Revolution Nerfs. Anyone pick these up yet? They look like they'd grab you and throw you back on if you slipped or something. Also wondering about the width, if they stick out past the wheels.

Of if anyone had any picks on their bikes, that'd be cool.

Opinions?

Thanks.

Krandall

I believe it's pro-armor that's been getting a slightly bad rap for inferior welds.

welds breaking and them not taking care of the customers.



Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

Gunz



I don't have these, but I do have the other ones and they have held up well the last 2 years I've been using them. No broken welds yet... I would recommend with confidence.


Dent Source LLC

941 +10 w/bar

rappyfreak

+1 I too have had them for 3 years and no problems whatsoever.
'06 Raptor 700: Yoshi RS-7 full, PCV, Pro Design Foam, EHS lid, Flexx bars, 2" Rox a/v risers, ASV C/5 levers, Powermadds, CCP, HDUSA i3500 +2 a-arms, Rap 700 SE front shocks redone by Wiig, Fox Podium X rear, DWT Drift rear and Hiper beadlocks, Pro Armor XC nerfs, Race grab bar, Tag Agro bumper/chassis skid, PRM 0.25" swinger skid

My name is Iñigo Montoya, you killed my father, prepare to die!

preddy08

I've had mine on my bike since 07 and had zero issues.
Just a little 81hp trail bike.


machelis

Sweet. I'll check around a little longer then make my decision. They look pretty badass if you ask me.

If anything breaks, I work in a metal shop. I'm covered  8)

Thanks fellas.

11Raptor

I have the Fat Peg Nerfs, almost a year now...no prob's
-2K7 Raptor700 SE2
-Houser +3/4 Blue Steering Stem
-Pro Taper Black SE bars
-ProArmor Kill Switch w/wrist teather
-ProArmor Skid Plates
-ProArmor FAT Peg Black Nerf's
-ITP Holeshot XCR's on ITP SS112's machined w/black
-Yoshi RS-2 Full Titanium Exhaust
-Quadbox FI Power Box
-2K5 2500 Dodge Cummins 4x4 QC w/35's
-EDGE w/Att.

Blair

i have AC racing nerfs... and love em... would buy em again in a heartbeat...
"The Difference Between Genius and Stupidity... Genius Has It's Limits"
"Scars are the Tattoo's of the Brave"
06 Raptor 700 SE - Pro Circuit T4 - PCIII - ASV Levers - AC Racing Nerfs - AC belly Skid (broken) - Holeshot XCR - Pro Taper Raptor Bend Bars - Pro-Tec Prefilter Airbox Lid - HID Headlights -

Krandall

Quote from: Blair on March 09, 2010, 02:00:42 PM
i have AC racing nerfs... and love em... would buy em again in a heartbeat...
+1 I've had my AC's for 3 years. I have the blackline series (powdercoated black)

only gripe is the powdercoat that has chipped off.. But they've been GREAT!!!


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

machelis

Does AC only have the basic race ones? On their website that's all there is. If I google it, I find the built in heelguards model (which don't really wow me all to much)

Blair

i have the same ones as krandall...

http://www.mxsouth.com/atv/acracing/ac-racing-nerf-bars-black-line-nerf-bars.htm

black too... and my only complaint is the same...  the powder coating has chipped on the bottom... not a big deal though...

they are awesome nerfs... not the fanciest looking but work great...
"The Difference Between Genius and Stupidity... Genius Has It's Limits"
"Scars are the Tattoo's of the Brave"
06 Raptor 700 SE - Pro Circuit T4 - PCIII - ASV Levers - AC Racing Nerfs - AC belly Skid (broken) - Holeshot XCR - Pro Taper Raptor Bend Bars - Pro-Tec Prefilter Airbox Lid - HID Headlights -

devious700rSE

ima a bigger guy and they have saved me a few times with all weight on one side no probs
07 Rappy 700rSE intake and sparks racing exhaust

gr8ride4u2luv

I have the older ones. Have had them for about 2 years now. NO PROBLEMS. I love them. Say what you want.
Barker In-Frame Duals
CP 11:1
Corrected Deck Height Cylinder
Hot Cam Stage III
KW HD Springs
Track Port & Polish by BO
+3 Throttle Body
Pro Design Intake w/ K&N
PCIII
Dynatek Prog. Ignition W/ Custom Curves
KDS Evac Valve
15T Front Sprocket
GNCC 22x7x10 Fronts
GNCC 21x11x9 Rears
Skat Trak Edge 22x11x10 Rear Paddles
TM Designworks Case Saver
TM Designworks Magnetic Oil Drain Plug
P

machelis

Quote from: devious700rSE on April 05, 2010, 10:00:13 AM
ima a bigger guy and they have saved me a few times with all weight on one side no probs

How are they strength-wise compared to GYTR nerfs? I got those right now.

Headrope

#14
Come on, folks. How revolutionary can nerf bars be?
From my perspective Pro Armor has done little more than release something 'new' to satisfy those who want the latest thing while at the same time moving forward after one of their own products tarnished ithe company's reputation for selling quality parts.
Two '06 700R SEs

Both with:                                          One also with:                   
GYT-R Sport front grab bar                   GYT-R Swingarm guard
GYT-R Engine/frame skid plate             GYT-R Nerf bars
GYT-R A-arm guards                           OMI Steering stem mount
GYT-R Aluminum radiator guard            ODI Lock-on grips