+2 CNC Head PLUS More!!SOLD

Started by Juggernaut_7, February 23, 2010, 03:42:53 PM

Previous topic - Next topic

Juggernaut_7

SOLD
08 GYTR SE 700
DMC Force 4 Duals
FCI Intake
PC 3
KDS evac valve
Dynatek Prog.
Full KDS Build

Onelunglow

Was this used and how long? What numbers did it produce? Thanks!
06 - White Raptor
04 - Green KFX80
92 - White/Blue Banshee
88 - Lt500 Drag quad (ski-doo - 809 installed)

Juggernaut_7

Yes it is considered used but very little im talking 3 to 4 hours run time.....  As far as numbers go i went to the dyno one time with stock tires without playing with my ignition or anything first run laid down right at 70 HP and this was a very hot day... I feel if i had stayed for a full blown tune and switched to dyno tires as most do would be a high 70 Hp build without a doubt...Make someone a runner for sure thanks :thumbs:
08 GYTR SE 700
DMC Force 4 Duals
FCI Intake
PC 3
KDS evac valve
Dynatek Prog.
Full KDS Build

Colorado700R

Link to my build thread with Dyno chart. I have this head/cam on my bike http://www.raptorsource.com/forum/index.php?topic=5010.150

73.4 HP and over 61ft/lbs of TQ @6000ft above sea level from a little 727 ain't to shabby

Juggernaut_7

08 GYTR SE 700
DMC Force 4 Duals
FCI Intake
PC 3
KDS evac valve
Dynatek Prog.
Full KDS Build