Little Sahara dyno pulls and tunes w/specs. DYNO CHARTS inside.

Started by Gunz, October 26, 2009, 04:45:30 PM

Previous topic - Next topic

Tim Barker

Ti valves will not last as long as stainless valves. There are some new coatings for the ti valves that help but are still not perfect.

Barkers Performance
www.barkersexhaust.com

VelociRaptor

Tim can tell ya probably as good as anyone. Ti isnt a long term metal, light yes but alot more to runnin it compared to steel. Your actually not even supposed to reuse Ti valves. Once theyve been cycled thats it really although many have and will reuse them.

jwraptor

This is good info.  Doesn't the yfz 450's have ti valves?  Why use some ti valves and some stainless on the +3 is it b/c of the weight of the stainless? 


And on to the dyno pulls.  I have never had my 700 based dynoed by dyno mike but he did dyno my 660 based raptor which was a 720 with 11 to 1 compression and stage 2 hotcam and +1 valves, LTE duals and edelbrock carb . the run conditions were 99.89 degrees farenhieght, humidity 7%, std 1.07--made 52.5hp and 44.93 tq.  The air fuel curve is not to be desired though.

He also dynoed my wifes 2005 yfz 450, stock bike with yoshi pipe, quadworks filter and cam mod.  The run conditions we 100.25 degrees farenheight, 11% humidity std 1.08--the bike made 45.01 hp and 30.25 tq. 

Later today I will try to post up those sheets.  He also dynoed my buddies ds650 but his bike slowed down in the actual race after the dyno and adjustments.

EHSRACING

I will put my 2 cents in Barkers Stg 2 head puts down awsome power it will hold more hp than most people will be able to put to the ground we went a 4.202 this weekend running a std stg 2 head that any customer can get and I feel pretty confident that we will be able to take it to a low teen shortly. This is on a OEM frame 700 (12milx105.5=839) on all motor running gas not alcohol.

I would love to see a head shoot out

Gunz

Quote from: Racers Edge Az. on October 31, 2009, 07:22:24 PM
I am down for the shootout, But if you are coming out this way, Then lets just leave them on the bikes and race.  :clap:

John, I'll call you soon. Looks like it's going to be RE3, Bark3, Bark2, BO's Mega, and I was going to see if Kenz is interested too. Kenny might throw one in as well.


Dent Source LLC

941 +10 w/bar

Krandall

Have you talked to Kenny about this yet? I was going to call him later anywho.


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

Colorado700R


Gunz



Dent Source LLC

941 +10 w/bar

Krandall



Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once


Gunz

Quote from: VelociRaptor on November 15, 2009, 07:51:37 PM
Updates?
Waiting on you, Kenny, and Jason/Tim to get me the heads. Roy (tonto13) and I will do the comparison dyno pulls around the first part of December. I'll call Tim and Kenny tomorrow and see whats up with theirs. :thumbs:


Dent Source LLC

941 +10 w/bar