San Diego dyno shops

Started by Duane, September 24, 2009, 12:20:03 AM

Previous topic - Next topic

Duane

Anyone recommend a San Diego Dyno shop? Ordering some stuff from TQS and will want to get her dyno'd soon.  :clap:
07 Rappy 700r SE1
1. Barker duals
2. FuelATV air filter
3. PCIIIusb
4. Prog Dyantek ing
5. stgII Hotcm
6. Kenny TB bore
7. JE 11-1 piston
ebay 8k HIDs, skat 21/12-8 7 paddles, I-shock I4500, G-force axle, CCP sterring stabilizer
other toy 66 2 door post Nova, LS1/4l60e, in progress

09RappySE

Duane here are a few in your area. ( I used my old zip 92064)

Alba Action Sports Telephone: 619-486-4380
12255 Poway Rd Email :  
Poway, CA 92064 Website:     About 1 mile

--------------------------------------------------------------------------------


Alpine ATV & Cycle Center Telephone: 619-445-1849
2226 Alpine Blvd S. Email :  
San Diego, CA 92126 Website:   Model 168-ATV About 8 miles

--------------------------------------------------------------------------------


Full Throttle Powersports Telephone: 619-258-0400
9143 Mission Gorge Road Email : mikebencic@gmail.com
Santee, CA 92071 Website: www.fullthrottleps.com 250ix About 9 miles

--------------------------------------------------------------------------------


Lees Cycle Telephone: 858-541-2080
9426-D Aero Drive Email :  
San Diego, CA 92123 Website: www.leescycle.com 250ix About 13 miles

--------------------------------------------------------------------------------


Hi-Tech Performance Telephone: 619-670-0754
2520 Sweetwater Email :  
Spring Valley, CA 91977 Website:     About 17 miles




If these won't work for ya try this.

http://www.dynojet.com/dyno_centers/list_atvkart.aspx



Hope this helps.


Jeff
734 09 Raptor
Meglodon by Bo,KW springs, Web 4 Cam, 54mm TB, 105.5mm CP cylinder, 12:1 CP,Barkers Inframe,Dynatek Coil,PC V,Dynatek Programable ignition,CCP stabilizer,+5 swinger,Boss Noss, Direct Drive Lock-up, KDS Evac valve,HID conversion,SPAL fan
Tuned by EHS Racing 74hp 52Tq

07 LT-R450
500cc Kit
Porting by Bo
DMC Pro Comp 4
Trinity intake
ATP intake Cam
Tuned by EHS 50hp 34Tq

Ranger

I would make the drive out to High Desert Dyno, DL700 has an awesome dyno place in CA...I think he's in Hesperia.

09RappySE

Quote from: Ranger on September 25, 2009, 07:29:25 AM
I would make the drive out to High Desert Dyno, DL700 has an awesome dyno place in CA...I think he's in Hesperia.

+2...if daniel is within you reach, I would make the trip for sure.
734 09 Raptor
Meglodon by Bo,KW springs, Web 4 Cam, 54mm TB, 105.5mm CP cylinder, 12:1 CP,Barkers Inframe,Dynatek Coil,PC V,Dynatek Programable ignition,CCP stabilizer,+5 swinger,Boss Noss, Direct Drive Lock-up, KDS Evac valve,HID conversion,SPAL fan
Tuned by EHS Racing 74hp 52Tq

07 LT-R450
500cc Kit
Porting by Bo
DMC Pro Comp 4
Trinity intake
ATP intake Cam
Tuned by EHS 50hp 34Tq

Pw383426

Quote from: 09RappySE on September 25, 2009, 07:39:55 AM
Quote from: Ranger on September 25, 2009, 07:29:25 AM
I would make the drive out to High Desert Dyno, DL700 has an awesome dyno place in CA...I think he's in Hesperia.

+2...if daniel is within you reach, I would make the trip for sure.

+3, if you can, take it up to Daniel.

BUT, if you insist on staying in San Diego, then I wouldn't take it any other place than MMAD, awesome at finding power

MMAD -Mummert Machine and Development
14368 Olde Hwy 80 Suite C
El Cajon, CA 92021
619-596-0312
619-562-6623

Duane




BUT, if you insist on staying in San Diego, then I wouldn't take it any other place than MMAD, awesome at finding power

MMAD -Mummert Machine and Development
14368 Olde Hwy 80 Suite C
El Cajon, CA 92021
619-596-0312
619-562-6623
[/quote]

Ya, I heard som e great stuff about him, especailly on Z400's but heard he wasn't fully set up for PCIIIs and dynojet jets, will give him a call and see whats shaking.

07 Rappy 700r SE1
1. Barker duals
2. FuelATV air filter
3. PCIIIusb
4. Prog Dyantek ing
5. stgII Hotcm
6. Kenny TB bore
7. JE 11-1 piston
ebay 8k HIDs, skat 21/12-8 7 paddles, I-shock I4500, G-force axle, CCP sterring stabilizer
other toy 66 2 door post Nova, LS1/4l60e, in progress