how to instal kill switch to a dynatek ignition !!! anyone

[dabigbratj]

what is best way to hook kill switch up with the dynatek ignition i have a pro armor kill switch any thought would be great

[Krandall]

It's SUPER easy. THe dynatek doesn't actualy matter (that you have it or not)

One Sec. lookin up some pics. 

[Krandall]

[Krandall]

Hopefully these pics help.

It's just splicing into the orange wire on the coil. And then finding a good ground spot like I have in the last pic.

[dabigbratj]

are you sure i have herd bad things about leaving it hooked up through the coil like that there is a kill switch ground wire that is part of the dyna maybe we will get more input.not doubting you just want to be sure

[Krandall]

I have had it like that since I started up my quad in April. Haven't had any issues. That's also how they suggest it in the Instructions from Pro-Armor. Not sure what'd be bad about it... 

I believe Preddy has his the same way.

[Livingmylife93]

Hopefully these pics help.

It's just splicing into the orange wire on the coil. And then finding a good ground spot like I have in the last pic.

Thats how i have mine 

[Krandall]

oop did some looking.. Appears your nearly correct. There's no problems hooking it to the coil. ONLY if you connect to the Red wire. It will pop fuses if you do so..
Research done here: http://www.raptorforum.com/forums/showthread.php?t=27676&highlight=pro-armor+kill+switch


You asked about this in JANUARY! 

[dabigbratj]

forgot about that so if im reading correct i will hook kill switch ground into the dyna kill switch ground wire then keep the other wire on the orange wire  on the coil correct?

[Krandall]

You don't have to hook the kill ground to the dyna ground they can be completely separate.

[dabigbratj]

oic well im still gonna wait to here how some have theirs wired with the dyna i trust you but want to make sure

[Krandall]

Werd.

[dabigbratj]

got it i was looking through the instructions and there it is tells you how lol 
just ground one to the frame then hook other into the white and black wire on the dyna harness thanks

[Bert]