2006 yfz450 $6500

Started by TechQuadShop, September 09, 2008, 01:58:47 PM

Previous topic - Next topic

TechQuadShop

Lots of the items are brand new.  Just got it running real strong with a fresh rebuild.

This bike is located in mount shasta but I am willing to deliver it as far south as sacramento. Most of these items are brand new never ridden including all 4 tires and rims, the Exhaust, the nerf bars and the rebuild. I have over 8 thousand invested in aftermarket parts. Here is a list of what it comes with

2006 YFZ Specs


• 2004 yfz450 frame
• Everything else is for an 06 yfz450.
• Herrman racing +1 swingarm that has been chromed by another company
• So-Cal fab +3 Long travel a-arms
• So-Cal fab +1 antivibe stem and clamp
• All 3 shocks are elka elites and have been valves for approximately 200lb rider
• Laker Custom plastics with standard rears
• ASV F3 shorty levers for 04 YFZ
• Flexx bars with the softest elastemers installed. If they are too soft for you tighten the bolt that runs through the yellow elastomer on each side
• FCI Intake
• 12.5:1 CP piston with cometic gaskets you can run super unleaded pump gas no problem. I would not recommend running the cheap 87 octane stuff. Use 91 octane atleast.
• UM racing nerf bars with stock pegs that have been chromed
• So-Cal fab chrome front bumper
• Spider SLT gel grips
• Blingstar MX grab bar
• Tusk gas cap (from rockymountain)
• The head has been ported by Reno Performance ATV. It is what they call a track port so great for low end.
• The seat is a Quad Tech Hump seat color Red, Silver, Black.
• ESR racing motor mounts
• ESR temp gauge
• ESR Throttle and brake reservoir cover
• The wheel hubs are made by Lone Star Racing. They are their older style that require a 3/8 24 American nut
• Rear axle is lone star as well. I cannot remember the length all I know is it is wider than stock.
• All brake lines are aftermarket braided, I cannot remember what brand I put on it but they are all the same.
• The cams have been set in the modded position so the intake cam is stupid one tooth.
• Brake and shifter are made by ESR
• The rear shock linkage is aftermarket and is Elka brand
• All of the wiring is off an 06 yfz so you have the upgraded capacitor
• Clutch cover is ESR
• Sidewinder brake caliper
• All tires and wheels are stock size and are brand new never ridden on
• ESR Race series exhaust
• Denton rebuildable steering stabilizer
• TM Design case saver


The bike runs awesome. I will give the new owner an extra brand new battery, large main jet assortment, spare brand new graphics kit, and some other stock parts that I still have. Price is $6500 firm. I will not trade this for anything cash only.










RAPTORSOURCE.COM #1 PLACE FOR BARKER AND MONSTER DUALS, PC3'S, INTAKES, AND MUCH MORE



For all of your aftermarket Raptor needs Call Tech Quad Shop @ 530-938-3985

preddy08

I thougth you just sold this?
Just a little 81hp trail bike.


Flynbyu

That's a SWEEEEEET deal for someone wanting a turn key trick bike!

~Brian
2003 Yamaha Raptor





Yamaha Raptor Forum

TechQuadShop

RAPTORSOURCE.COM #1 PLACE FOR BARKER AND MONSTER DUALS, PC3'S, INTAKES, AND MUCH MORE



For all of your aftermarket Raptor needs Call Tech Quad Shop @ 530-938-3985

FoundArealQuad

That's super nice for the money :thumbs:
DMC Force 4s, PCIII, Mod Quad Intake, Flexx Bars, Alba Nerfs with Pro Pegs, Rox +2 adjustable risers, CCP, EHS airbox cover

Peelz

Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"


kyledvor61

nice graphics kit :thumbs: :grin_nod: :grin_nod:

BackwoodsBoy

Do you have any more differnt style of graphic kits?
2007 Rappy SE
A few mods, more to come!

Bert

Great looking quad Steve  8)

Whats your next ride going to be?