Partin 'er out!!!

[h0tr0d18]

Well here it goes!!! I am just checking out how much of my quad I can sell in a part out. I am looking for serious enquiries only, if you can't pay for what your interested in please don't post. I put alot into this quad and I will only part out if I can sell everything. Everything on the quad is aftermarket and in primo shape!!!

Engine 660 HR based 720 CSR HV P&P, X4 cam, Weisco billit clutch basket and dirt digger clutch. Will sell head seperatly if I can sell bottom end seperatly, other than that the engine goes complete!!! $2500 Never Dyno'd, they're hard to find up here.

39MM FCR's with custom intake setup and dual K&N with 1 set of outerwears.
$800.00

Barker dual exhaust, with bung for wideband setup (can sell wideband with or with out pipes) Comes with spare headpipe that is brand new and has no bung welded in.
$700 without AEM wideband
$850 with AEM wideband

Frame and subframe powdercoated matte black, subframe has custom battery box for grizzly battery. $500.00

Jenssen +2+1 Long Travel A-arms powder coated matte black to match frame. Heims all in great shape and A-arms have been modded for race setup on Heims (Jenssens did this mod) Comes with extended tie rods $500.00

Full Elka suspension set, comes with LT linkage for the rear end. Quad rate fronts (non rezzi) rear dual rate remote rezzi, fronts are in great shape and the rear has dried out seals as I bought it from a dealer who had it sitting on the shelf for awhile works great just won't hold a nitrogen charge for more than a month or so. Rebuild on the rear is around $100 Full set $1200

Tucker +2 Swingarm Gloss black, comes with twin row bearing carrier and banshee style chain guide $450

Durablue 2+2 axle $350.00

Hiper carbon fiber rims with RAZR2's mounted, reasonable wear, still plenty of life on the tires and no damage to the rims. $1000

Houser +2 Steering stem Blue, comes with 1 1/8" Houser bar clamp $250

Tag T2 1 1/8" bars MX bend. $100.00

AC Blackline nerf bars $200.00

Plastics factory blue in great shape cut to fit the dual exhaust, comes with aftermarket warning labels and seat covered to match. Graphics are the skin industry blue graphics. $400

2 twist throttles with extra cables for stock carbs and FCR's $100

Custom rear grab bar $80.00

Ofcourse there are odd's and ends available here, nuts bolts etc. Rad and fan, electrics, lever's etc.

Remember, this will not happen unless I can get rid of all of it. If you are seriously interested in something let me know and I will stick your name up beside the item, I will take multiple names for each item and I will work my way down the list if people back out. This quad has maybe 20 hours after the build, I am looking at a side by side and if I could trade straight across for a Rhino or Kawi side by side I would!!! I am also up for trades on just about anything if it is a trade for the complete quad. This is all I can manage for pics right now from work. The CT is not on the quad obviously because I am selling Barker duals but the rest is the same, except the rims and tires.  Prices are OBO make me an offer but I wont part until the motor, exhaust and carbs are gone.

[Peelz]

frame and all from a 660 I take it?

[h0tr0d18]

yes it is a 660 based bike.  Did I miss that??? Net is acting up like crazy here and I can't read anything and pages take forever to load up grrr

[h0tr0d18]

BUMP  This part out is going ahead now.

[Segkast]

Hate to see this after you get so much work into it !!! Good luck on it Rod, I might hit you up for something at some point here... Good Luck Brother !!!

[h0tr0d18]

Thanks Seg, I appreciate it.  I have a few other projects on the go right now and it's time to start clearing the garage out 7 quads is a little much when your trying to build a Jeep and get a buisness off the ground hahaha.

[Caliraptor]

pics?

[h0tr0d18]

I can get ya pics of anything you are interested in, I havent pulled it apart yet.  BTW love the avatar pic lol

[h0tr0d18]

Swinger, axle and carbs are all gone now.  oh plastics too

[CalledFollower]

Was wondering of you had a set of stock headlights, and if so how much would you'd want for them.  Thanks.

[tokie856]

Do u have the rear brake caliper and rotor?
PM me please at wts@mywdo.com.
Thanks,
tokie856

[h0tr0d18]

I think I have a spare caliper somewhere and I should have a rotor aswell.  PM me