Shout Box

...loading shoutbox...











« previous next »
Pages: 1 [2]   Go Down

Author Topic: New Rappy Project  (Read 1616 times)

Offline Krandall

  • Führer
  • SiteAdmin
  • Hero Member
  • *****
  • Posts: 36324
  • Street Cred: 1337
  • Dracus II
    • Yamaha Raptor Forum
    • Email
Re: New Rappy Project
« Reply #15 on: June 24, 2009, 08:44:47 AM »
It's made by Easton. I didn't even pay attention to it. Didnd't know they made stuff for quads. I know they make stuff for bikes (pedal style) unless your just incorperating one of them into the quad :)

Super light composite though :thumbs:
Logged


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

Offline J-HILT

  • Jr. Member
  • **
  • Posts: 186
  • Street Cred: 1
    • Email
Re: New Rappy Project
« Reply #16 on: June 24, 2009, 11:47:22 AM »
Quote from: Blair on June 23, 2009, 11:24:22 PM
are thoes bars made by easton or is that just a sticker??

They are made by easton..The bars are so light I almost thought they were fake at first. .I believe they are carbon fiber 8)
Logged
**Racers Edge**
** Wild Ones Racing**
CNC Head
14:1 Cp Piston
X-4 Cam
+2TB *Kennys*
PCIII
Dynatek Ignition
LTE Dual Exhaust
Can't give away all my tricks

Offline socalrappy700

  • VIP+
  • Hero Member
  • *
  • Posts: 8116
  • Street Cred: 15
  • Ex Silvis, Pugnabimus
    • Raptorsource.com
    • Email
Re: New Rappy Project
« Reply #17 on: June 24, 2009, 12:02:37 PM »
Damn, looks like its going to be a lightweight runner!  I hope you didn't pay for it with school loans this time.  Do you work for Racers Edge now?
Logged
07 SE2

~Erich


Yamaha Raptor Forum

Offline Kenny

  • Engine Guru
  • VIP
  • Sr. Member
  • *
  • Posts: 510
  • Street Cred: 8
    • Email
Re: New Rappy Project
« Reply #18 on: June 24, 2009, 05:04:54 PM »
Quote from: Socalrappy700 on June 24, 2009, 12:02:37 PM
Damn, looks like its going to be a lightweight runner!  I hope you didn't pay for it with school loans this time.  Do you work for Racers Edge now?
You know he ain't that lucky.........Parts on the cheap and all that expertise would just seem to be an unfair advantage ;)
Logged
KDS Racing
685 Hope Rd
Floyd VA 24091
NEW PHONE 540-818-9154
Paypal: kenny@swva.net
:satan:

Offline Blair

  • VIP
  • Full Member
  • *
  • Posts: 351
  • Street Cred: 0
Re: New Rappy Project
« Reply #19 on: June 24, 2009, 11:09:19 PM »
nice... never would have thought the technology that is in my hockey stick would be found on a quad...
Logged
"The Difference Between Genius and Stupidity... Genius Has It's Limits"
"Scars are the Tattoo's of the Brave"
06 Raptor 700 SE - Pro Circuit T4 - PCIII - ASV Levers - AC Racing Nerfs - AC belly Skid (broken) - Holeshot XCR - Pro Taper Raptor Bend Bars - Pro-Tec Prefilter Airbox Lid - HID Headlights -

Offline Danny T

  • Sr. Member
  • ****
  • Posts: 893
  • Street Cred: 3
Re: New Rappy Project
« Reply #20 on: June 30, 2009, 09:38:21 AM »
Quote from: J-HILT on June 24, 2009, 11:47:22 AM
Quote from: Blair on June 23, 2009, 11:24:22 PM
are thoes bars made by easton or is that just a sticker??

They are made by easton..The bars are so light I almost thought they were fake at first. .I believe they are carbon fiber 8)

Weight 135 grams (25.4/610 mm)
146 grams (31.8/635 mm)

 
Diameter 25.4 and 31.8 mm
Width 610 mm (25.4), 635 mm (31.8)
Rise Low rise 
Bend 9° sweep | 5° upsweep
Color New carbon unidirectional design 
Material Proprietary Easton CNT composite with Enhanced Resin System™
Technology Phenomenal fatigue life and increased toughness
Reinforced stem and brake lever clamping zones
Easton TaperWall™
Limited 5-year warranty
Not compatible with bar ends 
Logged

Offline J-HILT

  • Jr. Member
  • **
  • Posts: 186
  • Street Cred: 1
    • Email
Re: New Rappy Project
« Reply #21 on: July 05, 2009, 02:34:13 PM »
Well, my Raptor project is almost done and man was in an EXPERIENCE....to say the least. I have a new respect for the work these guys do day in and day out. I learned more about about engines and bikes over this past month than I have in my 25 years of existence :lol: I know that was hard on all of them at the shop :lol: Just to get the knowledge from these guys was priceless. There were allot of bumps in the road but everything worked out great! Whatever time you think it is going to take, always x2 :lol: I want to thank John, Brett, Bobby, Aaron, Beto, and Morgan for helping make this happen. I wouldn't have been able to do it without you!!

So here is the 830!

Beginning

I'm Rolling!







Almost done

« Last Edit: July 05, 2009, 02:52:29 PM by J-HILT »
Logged
**Racers Edge**
** Wild Ones Racing**
CNC Head
14:1 Cp Piston
X-4 Cam
+2TB *Kennys*
PCIII
Dynatek Ignition
LTE Dual Exhaust
Can't give away all my tricks

Offline Krandall

  • Führer
  • SiteAdmin
  • Hero Member
  • *****
  • Posts: 36324
  • Street Cred: 1337
  • Dracus II
    • Yamaha Raptor Forum
    • Email
Re: New Rappy Project
« Reply #22 on: July 06, 2009, 08:06:59 AM »
Lets see a pic of this Mechanical Fuel Injection Setup!!! :clap: :clap:
Logged


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once
Pages: 1 [2]   Go Up
« previous next »