The Moose is headed South

Started by rutcutter, February 12, 2009, 05:35:11 PM

Previous topic - Next topic

Kenny

KDS Racing
685 Hope Rd
Floyd VA 24091
NEW PHONE 540-818-9154
Paypal: kenny@swva.net

:satan:

DL700



Camshaft Profiles:

VALVE
LIFT
   

DURATION
   

DURATION
@ 0.050"
   

GRIND
NUMBER
   

DESCRIPTION


80-932

$300.00

.500/.460
   

290°/290°
   

266°/265° @.050
   

grind #290
   Web Cam Inc. Product Photo    

Race profile to increase mid and upper end performance. Must use special compression release pin included with cam. A WEB CAM winner! Requires Exhaust System, High Compression Piston, Performance Valve Spring Kit, and Clearance Rocker Arms for cam rotation. Check ALL clearances!
CUERVO RACING

Kenny

Quote from: rutcutter on February 20, 2009, 02:19:31 AM
Here is what John from Racers Edge sent me. Looks like I got more than I thought.

It shows the first run when I took it there and the final run after they worked their magic.


DOH!! I just sent those Racers Edge fellas a part just to make big valves work better on a stock bore! Dealer install only part. Might as well run in the house and grab a stack of cash.......and head on back down  :rofl: Great job! :clap:
KDS Racing
685 Hope Rd
Floyd VA 24091
NEW PHONE 540-818-9154
Paypal: kenny@swva.net

:satan:

Krandall



Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

rutcutter

???????? Kenny what part are you refering to? ???
08 Grey 700R
Web 4 Cam
PCIII
Dynatek Prog. Ign. custom curve
Kenny's +3 Throttle body
Kenny's evac valve
FCI intake
Barker dual exhaust
Racers Edge12:1 piston
Racers Edge CNC porting
Ferrea +2 intake and exhaust valves
Kibble White valve springs
Hot Rod +5 stroker crank

Racers Edge Az.

Moose,Thanks for making the trip. I hope we did not disappoint you. If you look at the dyno sheet you can tell that there were 36 different pulls. With each pull a change was made in map, timing, or hardware.

Thanks again for the Challenge and opportunity,
John

rutcutter

John, you guys were great, you all gave me more than I expected and I greatly appreciatte it!!

I'm headed to the dunes in the morning, can't wait.
08 Grey 700R
Web 4 Cam
PCIII
Dynatek Prog. Ign. custom curve
Kenny's +3 Throttle body
Kenny's evac valve
FCI intake
Barker dual exhaust
Racers Edge12:1 piston
Racers Edge CNC porting
Ferrea +2 intake and exhaust valves
Kibble White valve springs
Hot Rod +5 stroker crank

Danny T

wow 36 pulls?!?!? nice work guys im sure thats a beast. im pretty much stock couldnt emagine that much power.

rutcutter

It's awesome!!! :thumbs: Got to ride it for the first time at Little Sahara Utah, it's fun to beat everyone to top of the hill!!! Well there was one fast Banshee :'(
08 Grey 700R
Web 4 Cam
PCIII
Dynatek Prog. Ign. custom curve
Kenny's +3 Throttle body
Kenny's evac valve
FCI intake
Barker dual exhaust
Racers Edge12:1 piston
Racers Edge CNC porting
Ferrea +2 intake and exhaust valves
Kibble White valve springs
Hot Rod +5 stroker crank

DL700

got to love it !!!, bring her down to GLAMIS for some more competition  :grin_nod:
CUERVO RACING

rutcutter

I'd love to come down, just need to rebuild my cash reserves. :rolleyes:
08 Grey 700R
Web 4 Cam
PCIII
Dynatek Prog. Ign. custom curve
Kenny's +3 Throttle body
Kenny's evac valve
FCI intake
Barker dual exhaust
Racers Edge12:1 piston
Racers Edge CNC porting
Ferrea +2 intake and exhaust valves
Kibble White valve springs
Hot Rod +5 stroker crank

NaturalRaptor

Glad all turned out so good for you!  :thumbs:  What fuel are you running?   ???
It takes 43 muscle's to frown and 17 to smile, but only 3 for proper trigger pull.

rutcutter

C12 110 is what they tuned it with. Right now I am running 50/50 110/91, seems to be running good. 4500' elevation here.
08 Grey 700R
Web 4 Cam
PCIII
Dynatek Prog. Ign. custom curve
Kenny's +3 Throttle body
Kenny's evac valve
FCI intake
Barker dual exhaust
Racers Edge12:1 piston
Racers Edge CNC porting
Ferrea +2 intake and exhaust valves
Kibble White valve springs
Hot Rod +5 stroker crank

NaturalRaptor

Thanks for the info. I spoke with John and they are going to build mine too. He said I could run 93 octane with a 12.1 CP piston at 400 feet elevation. Here is what I am doing. I want to stay with pump gas 93 is the best we can get at our pumps around here.
1: Racers Edge CNC Port and Polish
2: 12:1 piston.
3: Megacycle X-4 Cam
4: Plus 1  +1 Valves Both intake & Exhaust
5: Kibble White Springs
It takes 43 muscle's to frown and 17 to smile, but only 3 for proper trigger pull.

rutcutter

08 Grey 700R
Web 4 Cam
PCIII
Dynatek Prog. Ign. custom curve
Kenny's +3 Throttle body
Kenny's evac valve
FCI intake
Barker dual exhaust
Racers Edge12:1 piston
Racers Edge CNC porting
Ferrea +2 intake and exhaust valves
Kibble White valve springs
Hot Rod +5 stroker crank