suspension adjustment question

Started by 1badazz_700r, March 03, 2009, 03:36:42 PM

Previous topic - Next topic

1badazz_700r

which screws do what? the top screw is low speed,the 17mm nut is high speed and the one on the bottom is rebound. is this correct.thanks

Just a little 778
105.5 WK cylinder CP 11:1
hotrods +5 crank
racersedge +2 head,with webb4
54mmTB with custom intake
sparks X-6exhaust
PC5/w autotune
dynatek programmable
slingshot lockup
+3 stock swingarm
hiper dual beadlocks/w gncc holeshots
flexx bars,burgard+2stem/w antivibe
ASV's
odi's

Krandall

I guess, I've never heard low speed and high speed, Always known them as Compression and Rebound.

The compression adjustment is the one on top with the reservoir and rebound is on the bottom of the shock.

Hope this helps.


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

preddy08

Quote from: Krandall on March 04, 2009, 12:58:09 PM
I guess, I've never heard low speed and high speed, Always known them as Compression and Rebound.

The compression adjustment is the one on top with the reservoir and rebound is on the bottom of the shock.

Hope this helps.

Raptor shocks have high and low speed adjustment unlike most aftermarket shocks. There is two different knobs to adjust the compression. I have'nt delt with them at all, so I dont know what knob does what.
Just a little 81hp trail bike.