Shout Box

...loading shoutbox...











Author Topic: Ron Jeremy cam  (Read 1164 times)

Offline VelociRaptor

  • Jr. Member
  • **
  • Posts: 179
  • Street Cred: 3
    • Email
Ron Jeremy cam
« on: February 24, 2009, 09:02:22 PM »
Just installed my first one, this it what the valve adjustments look like.
Stock settings, see how much the smaller base circle effects the rockers:


Now this is adjusted, left the lock nut off one side to see how much adjustment it takes:

Offline Peelz

  • Sugar Cookie
  • SiteAdmin
  • Hero Member
  • *****
  • Posts: 25589
  • Street Cred: 54
  • food makes me sick
    • Email
Re: Ron Jeremy cam
« Reply #1 on: February 24, 2009, 09:29:13 PM »
Totally not what I was thinking.  :lol:  cool pics. Best shot of rocker adjustments I have ever seen.
Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"


Offline VelociRaptor

  • Jr. Member
  • **
  • Posts: 179
  • Street Cred: 3
    • Email
Re: Ron Jeremy cam
« Reply #2 on: February 24, 2009, 09:39:08 PM »
Kodak camera baby!

Offline Peelz

  • Sugar Cookie
  • SiteAdmin
  • Hero Member
  • *****
  • Posts: 25589
  • Street Cred: 54
  • food makes me sick
    • Email
Re: Ron Jeremy cam
« Reply #3 on: February 24, 2009, 09:42:50 PM »
Kodak camera baby!

Word! I use 90% kodak industrial printing equipment at work.



Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"


Online Krandall

  • Führer
  • SiteAdmin
  • Hero Member
  • *****
  • Posts: 36324
  • Street Cred: 1337
  • Dracus II
    • Yamaha Raptor Forum
    • Email
Re: Ron Jeremy cam
« Reply #4 on: February 25, 2009, 10:20:19 AM »
smaller base circle to ensure proper valve seating on combustion? ???

looks like quite a difference for sure! Who's head is that? :)


Sponsored by:
Yamaha Raptor Forum

PCIII Maps Here:
http://www.krandall.com

Cowards die many times before their deaths The valiant never taste of death but once

Offline DL700

  • Full Member
  • ***
  • Posts: 346
  • Street Cred: 5
    • Email
Re: Ron Jeremy cam
« Reply #5 on: February 25, 2009, 10:55:47 AM »
all of the new BIG cams are on smaller base circles.... this allows more lift while keeping the geometry in spec.....also fits into the head without machining.....
i personally recommend lash caps to bring the valve height up a hair, and is the way i run mine.... u dont get to go this big on a cam without a few additional tricks
CUERVO RACING

Offline tonyrt44

  • VIP
  • Jr. Member
  • *
  • Posts: 128
  • Street Cred: 0
  • when you present yourself, you gotta do it right
Re: Ron Jeremy cam
« Reply #6 on: February 25, 2009, 12:37:36 PM »
looks just like my Webs camshaft when I installed it
Ranking:   ???
  

Offline VelociRaptor

  • Jr. Member
  • **
  • Posts: 179
  • Street Cred: 3
    • Email
Re: Ron Jeremy cam
« Reply #7 on: February 25, 2009, 04:21:07 PM »
I just wish someone would just make rockers with .100" bigger rollers on em for these cams.

Offline Kenny

  • Engine Guru
  • VIP
  • Sr. Member
  • *
  • Posts: 510
  • Street Cred: 8
    • Email
Re: Ron Jeremy cam
« Reply #8 on: February 26, 2009, 09:46:32 AM »
I just wish someone would just make rockers with .100" bigger rollers on em for these cams.
I have rockers with .100" larger wheels, but it sends the rockers far too deep and pulls the adjuster up on it's edge. Lash caps are for sure the way to go. Sinking the valves works too..... but that is easier said than done, and requires shimming the springs. I am working on .150" longer valves for my big cams and "kit" heads(w/ special springs). I recommend  6mm x.085" lash caps from R/D springs. It turns out there is a typo on the cam card too.... The cam is actually .519"/.479" intake/exhaust lift measured in the head. Not bad for the smallest cam in the line-up eh? I really think you are gonna like this cam :grin_nod:
KDS Racing
685 Hope Rd
Floyd VA 24091
NEW PHONE 540-818-9154
Paypal: kenny@swva.net

:satan:

Offline VelociRaptor

  • Jr. Member
  • **
  • Posts: 179
  • Street Cred: 3
    • Email
Re: Ron Jeremy cam
« Reply #9 on: February 26, 2009, 12:48:31 PM »
Well, thats just a # I threw out there. Play around with diameters until you get a good compromise. A larger roller will require less clearancing too. The longer valves are something I know about but some may not be taking the engine down all the way to do a valve swap and thought a modified or aftermarket rocker would fit the bill.

Offline blueyamaha

  • Full Member
  • ***
  • Posts: 264
  • Street Cred: 0
Re: Ron Jeremy cam
« Reply #10 on: February 27, 2009, 10:56:01 PM »
Thats what it takes to adjust the valves? Damn that looks easy!!


Offline VelociRaptor

  • Jr. Member
  • **
  • Posts: 179
  • Street Cred: 3
    • Email
Re: Ron Jeremy cam
« Reply #11 on: February 28, 2009, 06:33:46 AM »
It is.