Tips to remove rear swingarm?

Started by Livingmylife93, April 26, 2009, 07:19:39 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Livingmylife93

April 26, 2009, 07:19:39 PM
Im rebuilding a buddies yfz, and trying to take the engine out.

Im having alot of trouble getting the bolt out that goes through the swingarm and engine, the only thing that works is punching it out from one side, but i dont have anything the right size to do that now. I got it about an inch on on the left side (the side it should slide out through)... please help lol

kyledvor61

#1
April 27, 2009, 02:23:53 PM
gotta have the swingarm at the right height where theres no pressure on the bolt

Peelz

#2
April 27, 2009, 02:28:31 PM
Quote from: kyledvor61 on April 27, 2009, 02:23:53 PM
gotta have the swingarm at the right height where theres no pressure on the bolt

miniho speaks wisely.  ;)   Hope shock is removed. Put something under swingarm to relieve tstress on that joint. then punch it through.  :thumbs:.
Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"

kyledvor61

#3
April 27, 2009, 03:39:26 PM
Quote from: PeelsSE2 on April 27, 2009, 02:28:31 PM
Quote from: kyledvor61 on April 27, 2009, 02:23:53 PM
gotta have the swingarm at the right height where theres no pressure on the bolt

miniho speaks wisely.  ;)   Hope shock is removed. Put something under swingarm to relieve tstress on that joint. then punch it through.  :thumbs:.
+1 took me 20 damn minutes to get mine out. i was messing with the right height on the swinger to have no stress. then it slipped right out

Livingmylife93

#4
April 27, 2009, 07:27:34 PM
Did what you guys said, worked good enough lol
Print
Go Up Pages1
User actions