RaptorSource.com
Product Biz => Product Reviews => Topic started by: Spartan on September 01, 2011, 11:12:07 PM
-
Finally got to use my set of valve tappet wrenches from: http://www.rockymountainatvmc.com/productDetail.do?navType=type&webTypeId=140&navTitle=Tools%2FShop&webCatId=22&keyword=motion+pro+valve+adjustment&prodFamilyId=17138
Worked really good once I got the hang of it. makes adjusting the valves a snap. and it is an interchangeable setup so it should work on a multitude of ATVs...for the 700, it was the 10mm main wrench and the small squarehead driver on top.
-
Good, maybe you can show them to people when you get to Little Sahara for the Rally
-
Only if you're there to help hold a few things :thumbs:
-
I'll let you try it out on my 660 after a few hours on the new motor/valves/stage 2 cam I'll need to check them. :)
Finally got to use my set of valve tappet wrenches from: http://www.rockymountainatvmc.com/productDetail.do?navType=type&webTypeId=140&navTitle=Tools%2FShop&webCatId=22&keyword=motion+pro+valve+adjustment&prodFamilyId=17138
Worked really good once I got the hang of it. makes adjusting the valves a snap. and it is an interchangeable setup so it should work on a multitude of ATVs...for the 700, it was the 10mm main wrench and the small squarehead driver on top.
-
No problem, I'll bring the whole set...but you're doing the checking, I have no idea how to work on a 660 :lol:
-
Have had one of those wrenches for a yr now and it does make adjusting the valves easier. :thumbs: