Print Page - Installing ASR a-arms, question

Title: Installing ASR a-arms, question
Post by: iluvdirt on July 08, 2008, 12:33:19 PM

Has anyone installed +2 up 1 racing arms and had trouble adjusting them so the inside of the wheels dont hit on the back of the arms?
Jeff

Title: Re: Installing ASR a-arms, question
Post by: Caliraptor on July 08, 2008, 02:32:42 PM

i think u have a twisted stem or pitman arm, one tie rod is longer than the other, letting it turn more to one side thus letting the wheel hit the arm

Title: Re: Installing ASR a-arms, question
Post by: iluvdirt on July 08, 2008, 02:48:04 PM

But it does it on both sides. Even after I adjust the toe.

Title: Re: Installing ASR a-arms, question
Post by: ThisGuyAlex on July 09, 2008, 12:41:13 PM

mine will do the same thing with the full flight arms......it's cuz of the 1 inch forward.....no big deal don't worry about it

Title: Re: Installing ASR a-arms, question
Post by: racinjason68 on August 01, 2008, 06:40:32 PM

I had the wicked a arms and didnt have that problem.....

Title: Re: Installing ASR a-arms, question
Post by: halffast on August 31, 2008, 09:43:24 AM

I didnt have this problem with my ASRs

RaptorSource.com

Raptor 660 Information => 660 Suspension Work => Topic started by: iluvdirt on July 08, 2008, 12:33:19 PM