Finally got to use my set of valve tappet wrenches from: http://www.rockymountainatvmc.com/productDetail.do?navType=type&webTypeId=140&navTitle=Tools%2FShop&webCatId=22&keyword=motion+pro+valve+adjustment&prodFamilyId=17138
Worked really good once I got the hang of it. makes adjusting the valves a snap. and it is an interchangeable setup so it should work on a multitude of ATVs...for the 700, it was the 10mm main wrench and the small squarehead driver on top.
Good, maybe you can show them to people when you get to Little Sahara for the Rally
Only if you're there to help hold a few things :thumbs:
I'll let you try it out on my 660 after a few hours on the new motor/valves/stage 2 cam I'll need to check them. :)
Quote from: Spartan on September 01, 2011, 11:12:07 PM
Finally got to use my set of valve tappet wrenches from: http://www.rockymountainatvmc.com/productDetail.do?navType=type&webTypeId=140&navTitle=Tools%2FShop&webCatId=22&keyword=motion+pro+valve+adjustment&prodFamilyId=17138
Worked really good once I got the hang of it. makes adjusting the valves a snap. and it is an interchangeable setup so it should work on a multitude of ATVs...for the 700, it was the 10mm main wrench and the small squarehead driver on top.
No problem, I'll bring the whole set...but you're doing the checking, I have no idea how to work on a 660 :lol:
Have had one of those wrenches for a yr now and it does make adjusting the valves easier. :thumbs: