RaptorSource.com

Classifieds => ATV Parts for sale => Topic started by: xxnightraven73x on July 11, 2010, 11:26:30 AM

Title: 700 and 660 parts need to go
Post by: xxnightraven73x on July 11, 2010, 11:26:30 AM
prices are obo but inclued shipping to the lower 48 unless otherwise noted
i have pics of most everything if not i will get some for you
700 parts
-------------------------------------
sprocket hub-40
header-40
canister-40
right spindle-40
reverse knob with cable-35
airbox to tb tube-20
front wheel hub with rotor-40
front brake master-30
indicator lights-35
rear dog bone-20
upper and lower engine mounts-35
pitman arm-20
rear brake rotor hub-25


2001-660 parts
-------------------------------------
water pump with good gear-35
water pump with bad gear-25
upper engine mount-30
t-stat housing-35
starter-40
reverse knob with cable-35
rear rims and tires titan fast trekker tires-100
misc engine gears (under clutch cover)-45
front calipers-25
counter balancer with gear-20
steering knuckles with wheel hubs and rotors-75
front brake master-30
rear brake rotor hub-25
2001 stock cdi-40
airbox with stock filter and lid-45
box to carb tubes-25
coil with wire and boot-25
tierods with ends-30
clutch cover no stripped threads-40
cylinder with piston-75
fuel tank-40
radiator and fan-65
shift drum-20
shift forks-25
rear wheel hubs-40
voltage regulator-25
stator-35
stator cover-40
cabe to head manifolds-30
grey hood-40
protaper se atv mid bend bars with cross bar and pad no grips-40
protaper se atv mid bend bars with cross bar and no pad with grips-40
01 shock link and dog bone-30
seat with a rip-40
left head light lensewith bulb and wires-25
indicator lights-25
key switch with one key-30
black dash-20
blue dash-20
counter balancer with gear-20
battery hold down-25
t-stat housing-35
rear master-30
front calipers-25
shifter with link-30
shifter with link-30
brake pedal-25
blue front shock covers-20
front and rear GYTR white shock covers-25
stock cam with gear and decomp-30
blue front and rear plastic-75+shipping*****
black and white front and rear plastic-75+shipping*****
Title: Re: 700 and 660 parts need to go
Post by: Colorado700R on July 12, 2010, 11:05:02 AM
Scott did you get my stuff shipped out?  I'm hoping to get this 660 all buttoned up on Friday!.....Finally :mad:
Title: Re: 700 and 660 parts need to go
Post by: Firemann32 on July 12, 2010, 04:00:22 PM


Looking for 1st gear on an 04' 660 Raptor Yamaha part number 5LP-17211-10-00

Let me know if you've got one.
Title: Re: 700 and 660 parts need to go
Post by: xxnightraven73x on July 14, 2010, 06:40:28 PM
yes i did aaron
i have a trans with a blown second gear
Title: Re: 700 and 660 parts need to go
Post by: devious700rSE on July 21, 2010, 07:34:01 PM
still got the tie rods ???
Title: Re: 700 and 660 parts need to go
Post by: xxnightraven73x on July 22, 2010, 09:42:00 AM
sure do ..... i havent been able to get on here for a bit ...but yes i do
Title: Re: 700 and 660 parts need to go
Post by: scooters700 on July 23, 2010, 08:54:26 AM
I need a radiator for a 08 700 let me know what u can find and price need before labor day :thumbs:
Title: Re: 700 and 660 parts need to go
Post by: xxnightraven73x on July 24, 2010, 10:11:51 AM
i dont have a 700 rad. atm ill let you know if i do get one though
Title: Re: 700 and 660 parts need to go
Post by: 700Miamilakes on December 26, 2010, 07:06:42 AM
do you still have the radiator and the rear frame?
Title: Re: 700 and 660 parts need to go
Post by: Firemann32 on January 20, 2011, 09:22:23 PM
cylinder with piston-75
radiator and fan-65
blue front shock covers-20
front and rear GYTR white shock covers-25
blue front and rear plastic-75+shipping*****
black and white front and rear plastic-75+shipping*****

Do you have any of this left for the 660 anyway you can send me pics?
Title: Re: 700 and 660 parts need to go
Post by: kincerjustin on February 26, 2011, 04:25:55 PM
I was wondering if you still had the blue front and back plastic?And if so,what kind of shape is it in?I have a 2003 Raptor 660.
Title: Re: 700 and 660 parts need to go
Post by: racinjason68 on March 23, 2011, 11:30:06 PM
Scott, I am in need of a reverse knob and cable...  Can you hook a brother up?
Title: Re: 700 and 660 parts need to go
Post by: dagladden on March 24, 2011, 08:03:12 AM
How are the treads on those rear tires?
Title: Re: 700 and 660 parts need to go
Post by: quadkiddd33 on May 11, 2011, 07:58:16 AM
wondering if u have any clutch parts?
Title: Re: 700 and 660 parts need to go
Post by: Nick on May 30, 2011, 01:00:10 PM
stock heat shield?