Print Page - how do you set the timing?

Title: how do you set the timing?
Post by: Livingmylife93 on May 08, 2010, 10:26:13 PM

Whick mark do you use on the flywheel?

And how do you line up the cam gear?

Title: Re: how do you set the timing?
Post by: Spartan on May 08, 2010, 10:37:26 PM

You line up the I mark on the flywheel (in the inspection cover hole) and the cam sprocket has a dash on it that you line up with the top of the head.

Title: Re: how do you set the timing?
Post by: txredxj on May 08, 2010, 10:46:18 PM

there is a raised line on the top of the head you line up the dash to. also on modded raptor forum ther is a how to section with a video to install a cam

Title: Re: how do you set the timing?
Post by: Spartan on May 08, 2010, 11:09:20 PM

To add to my original post, you line up the cam gear by turning the motor over by hand using the flywheel nut accessible under the inspection cover (the big one, takes a 14mm allen head).

Title: Re: how do you set the timing?
Post by: Livingmylife93 on May 11, 2010, 03:51:02 PM

spunds good guys, thanks.

There is only one mark on the flywheel right? I know some have like a I then 2 more

Title: Re: how do you set the timing?
Post by: Krandall on May 11, 2010, 04:03:36 PM

Quote from: Livingmylife93 on May 11, 2010, 03:51:02 PM
spunds good guys, thanks.

There is only one mark on the flywheel right? I know some have like a I then 2 more

I believe there are 2 (could be 3)

ones an I and the other is an H

make sure to line up w/ the I :)

Title: Re: how do you set the timing?
Post by: Livingmylife93 on May 11, 2010, 04:06:35 PM

alright cool. thanks!

RaptorSource.com

Raptor 700 Information => 700 Motor Mods => Topic started by: Livingmylife93 on May 08, 2010, 10:26:13 PM