RaptorSource.com

Raptor 700 Information => 700 Motor Mods => Topic started by: preddy08 on April 06, 2010, 08:46:19 PM

Title: Gee will this hold?
Post by: preddy08 on April 06, 2010, 08:46:19 PM
So I was snooping around the frame while my motor is out and saw the gussets that this total HACK job welder added and what do ya know, it broke again! This time I got to take it to a buddy of mine and we tried it again, only this time added a few more pieces :mad:
(http://i11.photobucket.com/albums/a195/preddy08/CIMG2075.jpg)
Title: Re: Gee will this hold?
Post by: Spartan on April 06, 2010, 08:48:28 PM
Hmm....I see a nice spot to hide the :peels:

Sucks your frame keeps breaking...damn weakass 700s
Title: Re: Gee will this hold?
Post by: Krandall on April 06, 2010, 09:42:02 PM
to much air!! :lol:


dang, that's unreal man. Maybe you have a weak 700 frame.
Title: Re: Gee will this hold?
Post by: Krandall on April 07, 2010, 08:13:02 AM
Here's kinda what I was thinking, if you filled in so it was all flat, then put a big piece of flat stock aluminum and welded it in place. then you'll at least move the stress points to where the welds are holding at the left and right of the gusset as shown in the pic.

or making the half moon shaped one bigger.
Title: Re: Gee will this hold?
Post by: preddy08 on April 07, 2010, 09:13:49 AM
Quote from: Krandall on April 07, 2010, 08:13:02 AM
Here's kinda what I was thinking, if you filled in so it was all flat, then put a big piece of flat stock aluminum and welded it in place. then you'll at least move the stress points to where the welds are holding at the left and right of the gusset as shown in the pic.

or making the half moon shaped one bigger.

I was thinking about that randi, but that big gusset will take most of the abuse and the plates on the side will just stabilize that weak area. Atleast thats what I'm hoping.
Title: Re: Gee will this hold?
Post by: Alkire193 on April 07, 2010, 09:33:25 AM
Ok, I have an idea. Now stay with me....

Install the motor

then weld a plate over both sides of the frame so the motor is protected by a stainless steel cocoon


....your welcome  :thumbs:

Title: Re: Gee will this hold?
Post by: Krandall on April 07, 2010, 10:20:58 AM
air flow.. who needs it.


:lol:
Title: Re: Gee will this hold?
Post by: Alkire193 on April 07, 2010, 01:39:41 PM
Quote from: Krandall on April 07, 2010, 10:20:58 AM
air flow.. who needs it.


:lol:

sir.....SIR!  I didnt say put a plate across the front. It creates a wind tunnel. At least 13 more HP.
Title: Re: Gee will this hold?
Post by: Krandall on April 07, 2010, 01:53:12 PM
Ooh, good call, didn't think about the swirl effect.

13hp.. I'm game.

and it's a sunshine blocker.. that's gotta be worth an additional 2. hmnmmmm may have to do it myself.
Title: Re: Gee will this hold?
Post by: Peelz on April 07, 2010, 01:56:37 PM
sweet!!!! weld-on hp!
Title: Re: Gee will this hold?
Post by: Alkire193 on April 08, 2010, 12:14:12 PM
Quote from: PeelsSE2 on April 07, 2010, 01:56:37 PM
sweet!!!! weld-on hp!

Your welcome....tell your friends