I know it maybe a long shot but does anyone know enough about this dynatek to help me with the shift light and launch limiter.. I have read over the instructions but it seems that you may have to have software to do it ???
Your best bet would be to contact SandDragon, I believe he played with the launch limiter.. I'm pretty sure it was him. :thumbs:
Krandall your them man..Thanks for the fast response :clap:
I try.......... :thumbs:
Once in a while :lol:
Did you install yours yet ???
naw, I'm waiting to get my dyno scheduled. Before I go I'll install it then :thumbs:
Don't quote me on the actual RPM... but if you hook up the purple wire, it should be @ around 4500 launch preset. You should not need the software to use this feature... you will however need the disc and the cable to change the RPM. You only get 1 shot at the launch and then you have to turn the key off to reset the launch limit. You should be able to test if it works by doing a WOT to see where it revs. Since 9100ish is the limiter... 4500 is a noticable difference. I will be trying to get some custom mapping done in the next few months (years :help: ). I will share my findings. :batman:
Quote from: SandDragon on June 18, 2008, 12:03:47 AM
Don't quote me on the actual RPM... but if you hook up the purple wire, it should be @ around 4500 launch preset. You should not need the software to use this feature... you will however need the disc and the cable to change the RPM. You only get 1 shot at the launch and then you have to turn the key off to reset the launch limit. You should be able to test if it works by doing a WOT to see where it revs. Since 9100ish is the limiter... 4500 is a noticable difference. I will be trying to get some custom mapping done in the next few months (years :help: ). I will share my findings. :batman:
The cable you can get from Dynatek. $40.
Software is available on my site. pciii.bob2bob.com
click files on top and you're good to go. :thumbs:
Quote from: Krandall on June 17, 2008, 08:15:43 PM
naw, I'm waiting to get my dyno scheduled. Before I go I'll install it then :thumbs:
Let me borrow it till sept :clap: