Here's what I'm thinking. Throw out some ideas, the first ten ideas that come up for a group buy will make the polls. We will put up two different polls with 5 ideas in each. The winner of each will be worked on for a group buy by the admins/mods. No promises, but we'll try like hell to make it happen. Soooo, post up some group buys you want. Turbo packages are in the near future so leave it out please.
Nothin???
I like the valve tappet tool idea...
My ideas I've had.. Based on things I'd like...
Flexx Bars.
CCP Steering Stabilizer (even though I don't need one)
Tappet Tool is a great idea :)
Custom ODI Laser Etched locks/grips
Handle Bar Tassles? :lol:
exhaust / barkers?
greasable steering stem mounts again?
Evac Valves?
Turbos?
Joka's Thongs :lol:
Helmets?
Ignitions?
Intakes/Filters?
that's all I gots.
Yamaha Rhino 700's. get us in on that :lol:
flexx bars please
+2 or +3 tb. asv levers. +2 or +4 swing arms
Quote from: Colorado700R on November 24, 2009, 01:43:32 PM
I like the valve tappet tool idea...
Aaron, get this going for us. I think its a great idea. I'll keep rocking on some more things, but that should be money. Show us a link again.
Quote from: 4gunz4x4z on November 25, 2009, 10:30:50 AM
Quote from: Colorado700R on November 24, 2009, 01:43:32 PM
I like the valve tappet tool idea...
Aaron, get this going for us. I think its a great idea. I'll keep rocking on some more things, but that should be money. Show us a link again.
I did some research last night mike, trying to find a set with a built in digital caliper, so no feeler guages needed.....I'm still looking.
Aaron
Long travel a-arms...Either JD or Houser
Lock ups/Clutch Kits
Foot Pegs (Pro Armor)
Steering Stems
OMI greasable steering stem mounts
HIPER wheels (good luck on that one)
Block off Plates
DrD reverse lever
evac. valve
ODI grips that get clamped on
Oh and I do love the idea of the valve tappet adjusting tool. :thumbs:
All ODI grips are lock on (or at least all for ATVs)...And you can already get a great price from TQS if you give them a call...Have talked to Steve before about a group buy on those but there'd have to be about 500-1000 people for any kind of volume discount haha.
I like the evac valve idea too...and the valve tappet tool.
ASV C5 Pro Perch / Clutch lever and C5 Brake lever
What do u think about oil filters? Every man here needs them...i'm talking about yamaha oem filter...i think that's a good idea, just every time u need one u'll take it from u garage and use it. I'll buy 50 if i'll see a nice price :)
Quote from: Ranger on November 27, 2009, 05:09:01 PM
Long travel a-arms...Either JD or Houser
With permission from JD Performance I would be willing to do a group buy in. Group Buy require a lot of work and special care. It's almost worth paying the extra 10-20.00 more to get better customer service and shipping times.
http://www.kbmotorsportsonline.com/chassis-components/a-arms/
www.kbmotorsportsonline.com (http://www.kbmotorsportsonline.com)
Quote from: nikita on November 29, 2009, 05:40:58 PM
What do u think about oil filters? Every man here needs them...i'm talking about yamaha oem filter...i think that's a good idea, just every time u need one u'll take it from u garage and use it. I'll buy 50 if i'll see a nice price :)
Yes, consumables or steering damper.
Example of rotary damper.
http://cgi.ebay.com/ebaymotors/Yamaha-Raptor-700-steering-stabilizer-free-shipping_W0QQitemZ290377003709QQcmdZViewItemQQptZMotors_ATV_Parts_Accessories?hash=item439bd172bd
Quote from: desert69dog on December 04, 2009, 12:40:32 PM
Quote from: nikita on November 29, 2009, 05:40:58 PM
What do u think about oil filters? Every man here needs them...i'm talking about yamaha oem filter...i think that's a good idea, just every time u need one u'll take it from u garage and use it. I'll buy 50 if i'll see a nice price :)
Yes, consumables or steering damper.
Example of rotary damper.
http://cgi.ebay.com/ebaymotors/Yamaha-Raptor-700-steering-stabilizer-free-shipping_W0QQitemZ290377003709QQcmdZViewItemQQptZMotors_ATV_Parts_Accessories?hash=item439bd172bd
That's the CCP steering stab.. I have one...excellent piece of equipment. :thumbs:
We've done Group buys before with him ;) and may again soon.
He's a sponsor here..so you can email him at customcncparts@yahoo.com if you'd like a quote. Very cool guy, tell him Raptorsource sent you :nod:
How bout a
"Dynatek Fuel Controller" ?
I'd like to give it a try, just stock with a silencer.
We're working on a few ideas. :thumbs:
how about a group buy for Peels...wherin all members put in money, and peelz gets said parts? :lol:
JK
i like the Barkers idea. and maybe nerf bars(w/ and w/o heal guards).
Quote from: Colorado700R on December 04, 2009, 12:44:27 PM
Quote from: desert69dog on December 04, 2009, 12:40:32 PM
Quote from: nikita on November 29, 2009, 05:40:58 PM
What do u think about oil filters? Every man here needs them...i'm talking about yamaha oem filter...i think that's a good idea, just every time u need one u'll take it from u garage and use it. I'll buy 50 if i'll see a nice price :)
Yes, consumables or steering damper.
Example of rotary damper.
http://cgi.ebay.com/ebaymotors/Yamaha-Raptor-700-steering-stabilizer-free-shipping_W0QQitemZ290377003709QQcmdZViewItemQQptZMotors_ATV_Parts_Accessories?hash=item439bd172bd
That's the CCP steering stab.. I have one...excellent piece of equipment. :thumbs:
We've done Group buys before with him ;) and may again soon.
He's a sponsor here..so you can email him at customcncparts@yahoo.com if you'd like a quote. Very cool guy, tell him Raptorsource sent you :nod:
Unless I find one used for a good deal between now and then, I will probably get down on a CCP group buy. :D
fast flex bars !!
Flexx bars or the ccp stabilizer would be awsome.
I might be down with a dampener
I got another suggestion. Contact Blingstar and tell them we'll all test this guard for them if they make it for the raptor. This one is for the 450. http://www.atvriders.com/atvnews/blingstar-2009-aluminum-atv-sprocket-rotor-guard.html
They also make a brake guard.
http://www.blingstar.com/default.asp
Quote from: desert69dog on December 19, 2009, 04:10:23 PM
I got another suggestion. Contact Blingstar and tell them we'll all test this guard for them if they make it for the raptor. This one is for the 450. http://www.atvriders.com/atvnews/blingstar-2009-aluminum-atv-sprocket-rotor-guard.html
They also make a brake guard.
http://www.blingstar.com/default.asp
Badass! Mucho better ground clearance. I'll bet the YFZ model will fit our rappys.
A buddy contacted Blingstar this morning. 450 won't fit the Raptor but they are working on coming out with it. Maybe next months buy. :thumbs:
Quote from: russ on December 19, 2009, 05:05:13 PM
Quote from: desert69dog on December 19, 2009, 04:10:23 PM
I got another suggestion. Contact Blingstar and tell them we'll all test this guard for them if they make it for the raptor. This one is for the 450. http://www.atvriders.com/atvnews/blingstar-2009-aluminum-atv-sprocket-rotor-guard.html
They also make a brake guard.
http://www.blingstar.com/default.asp
Badass! Mucho better ground clearance. I'll bet the YFZ model will fit our rappys.
Quote from: desert69dog on December 21, 2009, 11:17:16 AM
A buddy contacted Blingstar this morning. 450 won't fit the Raptor but they are working on coming out with it. Maybe next months buy. :thumbs:
Quote from: russ on December 19, 2009, 05:05:13 PM
Quote from: desert69dog on December 19, 2009, 04:10:23 PM
I got another suggestion. Contact Blingstar and tell them we'll all test this guard for them if they make it for the raptor. This one is for the 450. http://www.atvriders.com/atvnews/blingstar-2009-aluminum-atv-sprocket-rotor-guard.html
They also make a brake guard.
http://www.blingstar.com/default.asp
Badass! Mucho better ground clearance. I'll bet the YFZ model will fit our rappys.
Thats weird, I wonder why it wont fit on a raptor. Same carrier and axle?? Anyhow I have the Lonestar sprocket guard for the 450 on my 700 and they are like $45 new from lonestar.com hella of alot cheaper then $140.00.
Any idears for the months coming up?
Not sure? I just changed the title...so we must be thinking the same thing right now. I'd like a gb on lighted whips for all the dang rallys coming up.
I'd like a lighted whip for LS, I won't night ride in St. A's
Funny, cuz I changed the title just before you did. :lol:
great minds think alike.
I wouldn't mind seeing another HID one.
Trying to think of things I "need"
Ok I'm working on a group buy on led whips. Shooting for less then $100 shipped.
I vote for ASV levers,Terry cable dual gassers, Flexx bars and Rox antivibe elite risers.
I was just going to say ASV's and maybe that little valve adjustment tool. My linesment pliers just are'nt cuting it.
Can we do a Hauler group buy?
Quote from: preddy08 on February 12, 2010, 09:02:17 AM
I was just going to say ASV's and maybe that little valve adjustment tool. My linesment pliers just are'nt cuting it.
Can we do a Hauler group buy?
The Hauler GB will never happen, unless I prepay for 300 sets and there ain't no way in hell I'm going to sit on 150 sets of tires that don't sell
Quote from: 4gunz4x4z on February 12, 2010, 01:55:34 PM
Quote from: preddy08 on February 12, 2010, 09:02:17 AM
I was just going to say ASV's and maybe that little valve adjustment tool. My linesment pliers just are'nt cuting it.
Can we do a Hauler group buy?
The Hauler GB will never happen, unless I prepay for 300 sets and there ain't no way in hell I'm going to sit on 150 sets of tires that don't sell
Party Pooper :lol:
How about some CNC head porting?
tb boring. new pistons.... hookers and blow... whatevah...
Quote from: PeelsSE2 on February 13, 2010, 11:55:04 AM
tb boring. new pistons.... hookers and blow... whatevah...
The tb boring would be great, but unfortunately Kenny is unavailable. I can set it up with another company, but I'm not sure how I feel about that yet. New pistons are something I can do, I'll get on it soon. Hookers and blow... I'll work on that in Halsey, there should be a perfect crew to work with on this up there. I'll get back to ya.
CNC head, I can do this buuut I would need about 10 peps to be committed to this and the cost would be around $600-1000 per head depending...
Not sure on that one... hmmm
Quote from: oooh Biiiilly on February 11, 2010, 08:32:22 PM
Ok I'm working on a group buy on led whips. Shooting for less then $100 shipped.
If you do a group buy on lighted whips the safeglow 6ft led seem to be fairly decent. but don't get the quick disconnect, POS!!!!!!!!!!! my wifes wire broke off after second ride. so you have to take the dame quick disconnect off and run a new rca to pole. piss pore design on that aspect. but led is holding up very well
I'm all for the group buys, but I'd stick to the more expensive items. Seems silly to spend all the time and effort on a 40 dollar part to save 5 bucks. I'd rather spend the 5 there and get 20 or more off on something more expensive.
Quote from: Mad Dog on February 12, 2011, 10:13:28 PM
I'm all for the group buys, but I'd stick to the more expensive items. Seems silly to spend all the time and effort on a 40 dollar part to save 5 bucks. I'd rather spend the 5 there and get 20 or more off on something more expensive.
Hey Guys New to this Forum - but we are all from somewhere else..
I have a group buy going right now on modded raptor and I would do one here also. I would also consider doing one on Billet gears 2nd or 3rd
let me know....pm me!
How about
JJ and A axle
Handle bar clamp
A arms
Radiator hoses
Oversize radiator
54mm TB
Trail Tech Lights Frame Mount
Quote from: Mad Dog on February 12, 2011, 10:13:28 PM
I'm all for the group buys, but I'd stick to the more expensive items. Seems silly to spend all the time and effort on a 40 dollar part to save 5 bucks. I'd rather spend the 5 there and get 20 or more off on something more expensive.
Sorry Mike, We not Ballin like you :mdymca:
Quote from: Shredder on February 13, 2011, 03:29:33 PM
Quote from: Mad Dog on February 12, 2011, 10:13:28 PM
I'm all for the group buys, but I'd stick to the more expensive items. Seems silly to spend all the time and effort on a 40 dollar part to save 5 bucks. I'd rather spend the 5 there and get 20 or more off on something more expensive.
Hey Guys New to this Forum - but we are all from somewhere else..
I have a group buy going right now on modded raptor and I would do one here also. I would also consider doing one on Billet gears 2nd or 3rd
let me know....pm me!
Welcome Shredder :wave: What are the Billet Gears going for $?
Quote from: Sand84 on February 13, 2011, 07:30:01 PM
Quote from: Shredder on February 13, 2011, 03:29:33 PM
Quote from: Mad Dog on February 12, 2011, 10:13:28 PM
I'm all for the group buys, but I'd stick to the more expensive items. Seems silly to spend all the time and effort on a 40 dollar part to save 5 bucks. I'd rather spend the 5 there and get 20 or more off on something more expensive.
Hey Guys New to this Forum - but we are all from somewhere else..
I have a group buy going right now on modded raptor and I would do one here also. I would also consider doing one on Billet gears 2nd or 3rd
let me know....pm me!
Welcome Shredder :wave: What are the Billet Gears going for $?
X2, and how much stronger are these over the stock gears? I see myself doing MANY 2nd gear launches over the next few months....
+1 on some trail tech frame mounts. Preferably HID's.
Got this group buy going on atm, it'll be going into march.
http://www.raptorsource.com/forum/index.php?topic=7464.0