Hey whats up everybody.
I own a 08 Ltr450 do most of my riding in sand out at Pismo, most of my cousin's drive 700 Raptors. I was telling one of them how I changed my sprokets to a 13/38 from 14/37 stock, he said some people have told him to change out the front to a 13t. I'd think it'd be better for the sand, it worked for mine I just need to get rid of my sandstars for some high roll out skat's.
Im not sure on his mods, but he does have a full white bros exhaust and intake, 20" sandstars. What would you guys recommend for the sand, and what about the rear sprocket? He showed me a catalog not sure of the name something moto? He was asking which one to order, he pointed out the renthal kit front and rear sprocket with chaing for like $150. I told him to just order the sprockets from ebay like I did. And also will the 13t work with the stock chain, and steel is better for the sand right, he wanted the aluminum?
Thanks in advance
Anybody?
we're just mad cause you get to go to pismo, and we don't! :bird: j/k
Stock chain may be too long, but not by too much. Pull a link if you have to.
You cousin's should stay with the 14T if he's already got the intake, Exhaust, and Fuel controller. I run less mods than him and my rappy ran great at Walden with a 14T, pushing 22" 7 paddle haulers.
Aaron
and don't ever get the aluminum unless you buy like 10 at a time.. they will wear real fast..
Quote from: downfour on June 09, 2008, 04:47:09 PM
and don't ever get the aluminum unless you buy like 10 at a time.. they will wear real fast..
+1
True dat.
~Brian
Were is everybody from on the forum, no Cali people? Plenty of time to go, Im not going unill 4th of July.
So no aluiminum, so I can make the chain shorter if needed, I don't think I was able to do that on the Suzuki.
Quote from: ls1ltr on June 09, 2008, 06:16:33 PM
Were is everybody from on the forum, no Cali people? Plenty of time to go, Im not going unill 4th of July.
So no aluiminum, so I can make the chain shorter if needed, I don't think I was able to do that on the Suzuki.
The stock 700 raptor chain has no Master link, but I doubt you'd need to shorten it for a 13T. But like I said, with small stars on their rappys I'd say run a 14T anyway. Lots of torque to apply to the sand with those gears.
Aaron
My 13/38 seems fine, on my 3rd chain & I tried to maintain stock length...
I like the 13T, gearing is tighter, good TQ. It lowers your top speed but how often are you riding 75mph
Quote from: ls1ltr on June 09, 2008, 06:16:33 PM
Were is everybody from on the forum, no Cali people? Plenty of time to go, Im not going unill 4th of July.
So no aluiminum, so I can make the chain shorter if needed, I don't think I was able to do that on the Suzuki.
I'm
from Cali...but I'm not there anymore. :( I am jealous you are going to pismo. :P