RaptorSource.com

Raptor 700 Information => 700 General Discussion => Topic started by: Peelz on September 19, 2009, 04:41:25 PM

Title: Blue LED's for the SE2
Post by: Peelz on September 19, 2009, 04:41:25 PM
Keep an eye out for deals on these for me guys. There are a ton of them out there. Most are waaay too expensive for what you get.

Looking to spend under $40.  :thumbs:
Title: Re: Blue LED's for the SE2
Post by: Blair on September 19, 2009, 04:49:17 PM
http://cgi.ebay.ca/2x-Blue-Car-24-LED-Strip-Light-Lamp-Waterproof-Flexible_W0QQitemZ260447009002QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item3ca3d9f8ea&_trksid=p3286.c0.m14

is this what you were looking for?
Title: Re: Blue LED's for the SE2
Post by: Peelz on September 19, 2009, 07:11:49 PM
yeah not bad.  :thumbs:
Title: Re: Blue LED's for the SE2
Post by: Headrope on September 20, 2009, 11:52:27 PM
Contact my buddy at flipflopled.com and tell him Jonathan sent you. He can get just about anything you can dream up or will make it.
His web site is primitive but don't let it fool you. He knows LEDs not HTML.  :D
Dude has been working the swap meet circuit on the West Coast for several years and even gets invited to Hot August Nights in Reno. He'll hook you up.
Title: Re: Blue LED's for the SE2
Post by: Peelz on September 21, 2009, 06:34:24 AM
will do, thanks headrope.  :thumbs:
Title: Re: Blue LED's for the SE2
Post by: Peelz on September 21, 2009, 10:12:43 AM
No offense, my friend. But that is still a bit too expensive for how many you get. Thanks for the idea though.
Title: Re: Blue LED's for the SE2
Post by: NaturalRaptor on September 21, 2009, 04:17:51 PM
I bought the flexible LED strips at http://www.oznium.com/
Build your own kit here.

http://www.oznium.com/led-flex-strips
Title: Re: Blue LED's for the SE2
Post by: Krandall on September 22, 2009, 07:42:02 AM
Oznium makes awesome stuff. And they have amazing customer service. :thumbs:
Title: Re: Blue LED's for the SE2
Post by: Peelz on September 22, 2009, 02:18:15 PM
THanks Nat, Randy.

Looking at that one too. I found a place on the bay that sells 10mm pre wired LED's. 10 bucks for 24. Each LED is wired with a resistor, and two leads. More work for me, but the price is right. you get a 100 for 20 bucks. ANd standard led size is 5mm, these are bigger and brighter.

ebay blocked at work, or I would post a link :lol: nazis


Title: Re: Blue LED's for the SE2
Post by: NaturalRaptor on September 22, 2009, 03:49:55 PM
I bought 4 of the 4.7 inch ones and mounted them under the fenders. Also one of the 9.5 inch for under the hood. They are wired with several feet of slack and that is all I used. Since the draw is so little I did not even use a relay, just straight from the positive on the battery to the switch. The LED strips also come with the exact size piece of 3M double sticky tape. And they are very bright too. Good luck with the decision.

Matt
Title: Re: Blue LED's for the SE2
Post by: Blair on September 24, 2009, 09:11:47 PM
nat... put pictures of that up... i would like to see....