RaptorSource.com

Raptor 700 Information => 700 Motor Mods => Topic started by: al2fast on July 02, 2009, 09:57:33 PM

Title: My Latest Dyno
Post by: al2fast on July 02, 2009, 09:57:33 PM
So, I finally got my ride back and here are the results, sorry no scanner.  My mods are as follows:

Barker Duals
Dynatek Programmable DL curves
Phucker Port +1 Ferrea valves & springs
HDD 5050 cam
+5 Hotrods crank
+3 mm TB
11:1 Wiseco
PC3
Kenny Evac Valve
Uni Dual Stage Foam filter on GYTR adapter
Pro-Tec air box lid

So the dyno guy was gone when I went to pick it up so someone else printed off the sheets.  The first one is HP Blue line is dynatek curve 2, Green line is dynatek curve 1, Red line was my old build which the mods for are listed for all 3 curves.  Next graph has the HP & TQ, but dude overlayed it on MPH instead of RPM.  Going to try and get it overlayed on RPM on Monday.  Nice big fat powerbands.  Can't wait to ride it.

(http://i294.photobucket.com/albums/mm98/AL2FAST/DSC02432.jpg)
(http://i294.photobucket.com/albums/mm98/AL2FAST/DSC02428.jpg)

THis is what happened on the first pull.  TOO MUCH POWER!
(http://i294.photobucket.com/albums/mm98/AL2FAST/DSC02435.jpg)
Title: Re: My Latest Dyno
Post by: Gunz on July 02, 2009, 10:43:49 PM
You got more hp and longer band without kenny's curve 2? Thats crazy. What the hell is that last pic of? Good #'s. :thumbs:
Title: Re: My Latest Dyno
Post by: Peelz on July 02, 2009, 11:26:57 PM
shredded a tire? nice!
Title: Re: My Latest Dyno
Post by: Ranger on July 02, 2009, 11:34:46 PM
I think he blew the packing out of the exhaust...
Title: Re: My Latest Dyno
Post by: Peelz on July 03, 2009, 12:11:12 AM
Quote from: Ranger on July 02, 2009, 11:34:46 PM
I think he blew the packing out of the exhaust...

makes sense.
Title: Re: My Latest Dyno
Post by: Gunz on July 03, 2009, 12:35:11 AM
I think shredding a tire sounds better. :rofl:
Title: Re: My Latest Dyno
Post by: 1badazz_700r on July 03, 2009, 02:18:40 AM
nice numbers :thumbs: I had the lugz blown right off  my gncc's on the dyn :'(. I was told there running to much brake when this happens
Title: Re: My Latest Dyno
Post by: al2fast on July 03, 2009, 07:50:20 AM
Yeah, it was just the packing ejected out of the barkers.  Happened on the first pull too that only put down 52 hp.  That bottom graph is on Curve 2 from DL.
Title: Re: My Latest Dyno
Post by: DL700 on July 06, 2009, 03:58:40 PM
NIce!! :thumbs:
the curve 1 and curve 2 are custom curves, nothing close to the stock DYNA ones :thumbs:

the custom curve 2 on his box has a bit more timing then custom curve curve 1 and it was not needed in this case.
Title: Re: My Latest Dyno
Post by: Krandall on July 08, 2009, 01:55:08 PM
Damn, I'm not even sure how the packing blows out on the barkers like that. I took mine apart this spring to check it out. And ntohing like that!
Title: Re: My Latest Dyno
Post by: Tim Barker on July 09, 2009, 06:38:29 AM
Krandall Me neither
Title: Re: My Latest Dyno
Post by: DL700 on July 09, 2009, 05:09:33 PM
its good packing fo sure but they all have their limited life span, expecialy if it get wet or run too rich