i'm hooking up my vapor kit and i'm not sure which wire to tap into for the RPM sensor, there are 2 wires coming out of the coil, can anyone tell me which one to splice into? the top looks like a red wire and the bottom is orange
(http://i30.photobucket.com/albums/c340/MrStevie/P6010126.jpg)
(http://i30.photobucket.com/albums/c340/MrStevie/P6010127.jpg)
also, where did you guys mount the vapor? i'm using the stock bracket that came with the kit and the stock handlebars
Figure it out Stevie? I did a search on some of the other forums, but I couldn't find anything out. I would just call Trailtech and ask them, they would deffinatly know.
follow the spark plug wire back and there was only 1 wire on mine. ???
Quote from: Yamahauler on June 03, 2008, 01:46:45 AM
Figure it out Stevie? I did a search on some of the other forums, but I couldn't find anything out. I would just call Trailtech and ask them, they would deffinatly know.
yeah i figured it out, i'm supposed to splice into the orange wire. i wired everything up but the rpm only reads from 750 to 900 at idle. that seems a little low, not sure if the vapor is reading right and i should adjust the idle screw, or if the vapor's wrong and i need to figure out what i did wrong