RaptorSource.com

Raptor 700 Information => 700 General Discussion => Topic started by: dabigbratj on October 28, 2008, 07:22:27 PM

Title: how to instal kill switch to a dynatek ignition !!! anyone
Post by: dabigbratj on October 28, 2008, 07:22:27 PM
what is best way to hook kill switch up with the dynatek ignition i have a pro armor kill switch any thought would be great
Title: Re: how to instal kill switch to a dynatek ignition !!! anyone
Post by: Krandall on October 28, 2008, 07:23:09 PM
It's SUPER easy. THe dynatek doesn't actualy matter (that you have it or not)

One Sec. lookin up some pics.  :thumbs:
Title: Re: how to instal kill switch to a dynatek ignition !!! anyone
Post by: Krandall on October 28, 2008, 07:24:05 PM
(http://bob2bob.com/images/killswitch1.jpg)

(http://bob2bob.com/images/killswitch3.jpg)

(http://bob2bob.com/images/killswitch2.jpg)

Title: Re: how to instal kill switch to a dynatek ignition !!! anyone
Post by: Krandall on October 28, 2008, 07:25:55 PM
Hopefully these pics help.

It's just splicing into the orange wire on the coil. And then finding a good ground spot like I have in the last pic. :thumbs:
Title: Re: how to instal kill switch to a dynatek ignition !!! anyone
Post by: dabigbratj on October 28, 2008, 07:27:14 PM
are you sure i have herd bad things about leaving it hooked up through the coil like that there is a kill switch ground wire that is part of the dyna maybe we will get more input.not doubting you just want to be sure
Title: Re: how to instal kill switch to a dynatek ignition !!! anyone
Post by: Krandall on October 28, 2008, 07:28:36 PM
I have had it like that since I started up my quad in April. Haven't had any issues. That's also how they suggest it in the Instructions from Pro-Armor. Not sure what'd be bad about it...  ???

I believe Preddy has his the same way.
Title: Re: how to instal kill switch to a dynatek ignition !!! anyone
Post by: Livingmylife93 on October 28, 2008, 07:29:37 PM
Quote from: Krandall on October 28, 2008, 07:25:55 PM
Hopefully these pics help.

It's just splicing into the orange wire on the coil. And then finding a good ground spot like I have in the last pic. :thumbs:

Thats how i have mine  8)
Title: Re: how to instal kill switch to a dynatek ignition !!! anyone
Post by: Krandall on October 28, 2008, 07:31:41 PM
oop did some looking.. Appears your nearly correct. There's no problems hooking it to the coil. ONLY if you connect to the Red wire. It will pop fuses if you do so..
Research done here: http://www.raptorforum.com/forums/showthread.php?t=27676&highlight=pro-armor+kill+switch


You asked about this in JANUARY!  :rofl:
Title: Re: how to instal kill switch to a dynatek ignition !!! anyone
Post by: dabigbratj on October 28, 2008, 07:36:45 PM
forgot about that so if im reading correct i will hook kill switch ground into the dyna kill switch ground wire then keep the other wire on the orange wire  on the coil correct?
Title: Re: how to instal kill switch to a dynatek ignition !!! anyone
Post by: Krandall on October 28, 2008, 07:41:37 PM
You don't have to hook the kill ground to the dyna ground they can be completely separate.

Title: Re: how to instal kill switch to a dynatek ignition !!! anyone
Post by: dabigbratj on October 28, 2008, 07:49:52 PM
oic well im still gonna wait to here how some have theirs wired with the dyna i trust you but want to make sure
Title: Re: how to instal kill switch to a dynatek ignition !!! anyone
Post by: Krandall on October 28, 2008, 08:22:01 PM
Werd. ;)
Title: Re: how to instal kill switch to a dynatek ignition !!! anyone
Post by: dabigbratj on October 28, 2008, 10:10:30 PM
got it i was looking through the instructions and there it is tells you how lol  :mad:
just ground one to the frame then hook other into the white and black wire on the dyna harness thanks
Title: Re: how to instal kill switch to a dynatek ignition !!! anyone
Post by: Bert on October 29, 2008, 01:22:23 PM
(http://i232.photobucket.com/albums/ee267/tqf1E/Pro%20Armor%20Kill%20Swich/ProArmorKillSwitch.jpg)

(http://i232.photobucket.com/albums/ee267/tqf1E/Pro%20Armor%20Kill%20Swich/ProArmorKillSwitchInstallationInstr.jpg)

(http://i232.photobucket.com/albums/ee267/tqf1E/Pro%20Armor%20Kill%20Swich/ProArmorInstallation.gif)