Text only | Text with Images

RaptorSource.com

Raptor 700 Information => 700 Maintenance => Topic started by: Danny T on September 19, 2008, 01:50:50 PM

Title: What size bolt is this please???
Post by: Danny T on September 19, 2008, 01:50:50 PM
Ok i lost my bolt that holds on my chain guard.
Can some one tell me what the thread is on this part? Thanks in advanced

The part number is
91312-06025-00
Title: Re: What size bolt is this please???
Post by: Jamie700R on September 20, 2008, 05:57:46 AM
The # you have turned up a different part than the bolt. Here's a link that might help. It looks like #29 is what your looking for? It is also the same bolt that holds on the front plastic under the hood.( Behind the yamaha symbol at the bottom of the radiator)

http://fiche.ronayers.com/Index.cfm/Module/Main/TypeID/3/Type/All-Terrain_Vehicle_(ATV)/MakeID/4/Make/Yamaha/YearID/47/Year/2006/ModelID/2133/Model/Raptor_700/GroupID/335607/Group/REAR_ARM_
Title: Re: What size bolt is this please???
Post by: Danny T on September 20, 2008, 08:19:53 AM
you know what i went to home depot and bought a few different M6 bolts and found one that works. just need a shorter one now. thanks!
Title: Re: What size bolt is this please???
Post by: Jamie700R on September 20, 2008, 01:48:49 PM
Just keep in mind that the bolt that holds on the chain guard(and nose) is a shoulder bolt. It allows the chain guard to move a little. Whine a non shoulder bolt would make it too tight. Id swap the nose bolt and replace that with a non shoulder bolt.
Text only | Text with Images