RaptorSource.com

Raptor 350 => 350 General Discussion => Topic started by: raptorfireman on August 23, 2008, 08:40:29 AM

Title: clutch problem
Post by: raptorfireman on August 23, 2008, 08:40:29 AM

I'm replacing my clutch and i'm having trouble getting the big 27mm nut off. It's the nut that holds pressure plate 1 on the parts diagram. Is it standard or reverse thread? :help:

Title: Re: clutch problem
Post by: exentix on August 23, 2008, 09:28:05 AM

i dont know but what clutch are you putting in it? i heard a few people had problems with the dirt digger clutch. rr34 on the forum said his only lasted 2 rides b4 it gave out. most people put a new stock one in from what i heard  :thumbs:

Title: Re: clutch problem
Post by: raptorfireman on August 23, 2008, 06:33:38 PM

I'm putting in the EBC clutch from RMATV.

Title: Re: clutch problem
Post by: exentix on August 23, 2008, 07:41:42 PM

i remember hearing something about it but i dont recall if it was a positive something

Title: Re: clutch problem
Post by: raptorfireman on August 26, 2008, 04:08:59 PM

I finally got the f :mad:g nut off. I had to use an impact wrench. However, before trying this I managed to break off one of the spring studs off of the back pressure plate.  :'( Now i'm stuck waiting for the new part to come in.