Here is a quick overview of what you need to do.
1. Remove the rear seat.
2. Remove the hood topper, by removing the two allen bolts on the top of it under the handlebars.
3. Remove all bolts holding your plastic on and then move onto removing the shift indicator electrical plug and overflow tube next to it.
4. Plastic should come off now.
5. Remove 4 bolts holding tank, as well as electrical plug, and fuel line on top of tank. ( also remove rubber attached to tank on the back of the tank)
6. Now you should be able to see the old stem mount. You will have to bend the locking tabs off of the bolts to remove them.
7. After you remove the old mount just clean the surface really well, coat the new mount with a light coat of grease, and reinstall using the old hardware from your old mount including the sleeves from the old mount.
8. Put everything back together just the same way you took it apart and your done!