RaptorSource.com

Mini-Raptors (250, 80, and 50cc) => Mini General Discussion => Topic started by: BoisBlancBoy on June 03, 2008, 03:46:43 PM

Title: Needle Clip
Post by: BoisBlancBoy on June 03, 2008, 03:46:43 PM

What exactly does moving the needle clip do?

Title: Re: Needle Clip
Post by: Flynbyu on June 03, 2008, 04:37:20 PM

Quote from: BoisBlancBoy on June 03, 2008, 03:46:43 PM

What exactly does moving the needle clip do?

The needle allows flow of fuel through the main jet. At half throttle, the needle raises up letting more fuel flow.

~Brian

Title: Re: Needle Clip
Post by: BoisBlancBoy on June 03, 2008, 05:13:13 PM

In what cases do you need to change it?

Title: Re: Needle Clip
Post by: Flynbyu on June 03, 2008, 05:16:16 PM

Quote from: BoisBlancBoy on June 03, 2008, 05:13:13 PM

In what cases do you need to change it?

With your mods, you should be fine. If you're going bigger cam and need more fuel, you can take the top of the carb off, remove the needle, drop the spacer/wascher/clip down one spot.

~Brian

Title: Re: Needle Clip
Post by: BoisBlancBoy on June 03, 2008, 05:31:39 PM

Cool, thanks for the info.