Unstable, should I do Wheel Spacers?

Started by SUNNY1881, June 17, 2008, 11:22:04 AM

Previous topic - Next topic

fire raptor

I have been using magic Racing billit wheel spacers for two years in Baja with 0 problems. 1" on each side in the front and 2" on each side in the rear. The total cost was 180$. my son also has the same setup. We are not jumpers but the terrain in very rocky and rough. These are solid vs stud extenders. I know some are for these and some are not but for us they work. My .02.

Flynbyu

I own G-Force spacers, and have been pleased with them. I have a G-Force axle sitting in my garage I need to put on. The spacers did make a difference in the way my ride handled.

~Brian
2003 Yamaha Raptor





Yamaha Raptor Forum

SUNNY1881

#17
Quote from: Livingmylife93 on June 17, 2008, 01:17:34 PM
I have ITP wheels that widen the front 2 inches, and they were only $20.
I wouldnt get spacers, maybe hubs..


To get the pic you just put an image code in your signature..

What wheels are they? Model? $20 dollars, where? Do they make them for the rear also?

Peelz

Quote from: SUNNY1881 on June 17, 2008, 04:33:43 PM
Quote from: Livingmylife93 on June 17, 2008, 01:17:34 PM
I have ITP wheels that widen the front 2 inches, and they were only $20.
I wouldnt get spacers, maybe hubs..


To get the pic you just put an image code in your signature..

What wheels are they? Model? $20 dollars, where? Do they make them for the rear also?

Get them at rocky mountain atv.  :thumbs:  I got them on the front accidentally when i bought front sand tires. they are much wider. My rears are not, thus I need the spacers. offset will be stated as  "5.0+3.0" or 6.0 +2.0 etc.
Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"


Livingmylife93

Quote from: Peels660 on June 17, 2008, 05:45:21 PM
Quote from: SUNNY1881 on June 17, 2008, 04:33:43 PM
Quote from: Livingmylife93 on June 17, 2008, 01:17:34 PM
I have ITP wheels that widen the front 2 inches, and they were only $20.
I wouldnt get spacers, maybe hubs..


To get the pic you just put an image code in your signature..

What wheels are they? Model? $20 dollars, where? Do they make them for the rear also?

Get them at rocky mountain atv.  :thumbs:  I got them on the front accidentally when i bought front sand tires. they are much wider. My rears are not, thus I need the spacers. offset will be stated as  "5.0+3.0" or 6.0 +2.0 etc.

Im not sure, ill look tommorow, i got them from my dealer but im sure RMATV will have them

kyledvor61


SUNNY1881

Quote from: Peels660 on June 17, 2008, 11:31:17 AM
links don't work. BUt I am pretty sure you are rferring to the extended studs. WHich I think are OK if you do not ride too hard, they put alot of stress on your hubs and lugs. I am getting some for the dunes for the rear only for my 660.

Here are the links again, they should work now:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=019&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=290238461314&rd=1
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=019&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=290239100249&rd=1

Take a look, I think I'll be fine I'm just a basic rider having fun, no jumping or racing or anything to serious!

Thanks guys, Sunny!

SUNNY1881

Quote from: kyledvor61 on June 17, 2008, 10:04:36 PM
you should be fine for how you ride

I should be fine with the extender's you are saying right? Just stud extender's. I think I'm going to buy them.

Peelz

Quote from: SUNNY1881 on June 18, 2008, 08:47:26 AM
Quote from: kyledvor61 on June 17, 2008, 10:04:36 PM
you should be fine for how you ride

I should be fine with the extender's you are saying right? Just stud extender's. I think I'm going to buy them.

I think you would be fine, unless you are a giant sasquatch lookin mofo. And you're not doing mx jumps any time soon. And I still think putting them on the front is not such a good idea. But the ones in your link are only 1.5 inch, so not so bad. Let us know what you think if you get them. And...you're on a 350 not a big bore. good luck.
Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"


ThisGuyAlex

my front is wider than my rear.....feels stble as hell to me.....just my $.02
sold the raptor....full on 05 yfz in progress...

stock parts: fuel tank, swingarm and rear shock

Peelz

Quote from: ThisGuyAlex on June 18, 2008, 03:30:24 PM
my front is wider than my rear.....feels stble as hell to me.....just my $.02

Alex, have'nt we had this conversation before?  :rofl: maybe another site?  :grin_nod:

my sand tires don't match. my fronts are 2 inches further offset, I did not like it for the sand at all, could not slide or get any good sidehill roost shots. Reare tires just dig in. Probably not as bad on hard ground.
Krandall: "peelz. I'll be real with you. As much as I hate on you for soccer, I really don't mind it"


mysteriouswhite

Ive been running g-force spacers. front and rear for about 1 1/2 years now without any problems.deff a huge difference in feel. much more stable. i mainly ride rough fast trails, heres a few pics of them installed




04 350, pro design, K&N, big gun, g-force, tag, renthal, AC, DG

mysteriouswhite

i also had my front rims flipped in most of those pictures, ive flipped them back to normal shortly after that. to wide for trails
04 350, pro design, K&N, big gun, g-force, tag, renthal, AC, DG