RaptorSource.com
Raptor 660 Information => 660 Motor Mods => Topic started by: dragonz on September 19, 2012, 03:23:10 AM
-
my 719 is about to gain a new head.
I have a Willykiller 3 plug head on its way to me from Canada. :clap:
Recon this should seriously wake my lil baby up.
Any predictions on HP?
Build will be:
102mm bore, 88mm stroke (Hotrods Crank) 13.5:1 piston, head shaved 10thou.
HV ported 3 plug head & X4 cam.
Dynatech Programmable ignition with Willykiller tunes (4 switchable maps)
39mm FCR's
Custom made inframe duals with Barkers cans
My No1 goal in life is to STOMP on my mates KTM556SX :D
He dynoed at 68hp a couple of weeks ago.
His bike is 25+ kg lighter, & he is probably a good 30+kg lighter than me.
:nod:
-
why would you make a shitty motor even more complicated?
:rofl:
JK dragoooooonz
badaass always wanted to see one
-
how many kg's are in a lb? ???
-
da fuk is a KG even? :rofl:
english dangit! :dragonz:
-
kg, short for kilogram.
lb, short for pound
So thats the English lesson done for the day!
Now
1kg = 2.2lb..........
Do I have to teach you maths as well?
:P
-
how many kg's are in a lb? ???
http://lmgtfy.com/?q=how+many+lbs+in+a+kg
-
Dude, we f**kin know what a damned kg is, we're being assholes because we don't want you using them as measurements. :rofl:
-
Thank you Peels...
that was my (VERY LAME) attempt at making fun of your metric system
-
wow...
Way to SRS in here.
http://bit.ly/yIfjCK
-
Oh you know peels... aLWAYS SERIOUS!!!
:bs:
-
http://bit.ly/UnSgqf
-
well, not that I want to drag this topic back to where it started or anything, but, I now have the new head in my hot little hands & am commencing to get it all together.............
Having some issues getting the right dia tubing for the exhaust, but we shall prevail (eventually)
Watch this space, ride impressions, pics, & ultimately dyno charts will be posted!
-
dragonz is gettin head!!!
question: do the sheep have sharp teeth?
:dragonz:
-
dragonz is gettin head!!!
question: do the sheep have sharp teeth?
:dragonz:
for you Peels, I will select a weaner lamb that has been seperated from its mum for 2 days........................
not sharp teeth, but............
-
Well, I finally got my hands on the head last week.
I built my own "in frame" Duals using Barkers cans, & installed the head last Friday.
What a massive difference!
I still have to finish dialling in the jetting & then want to get it dynoed, but the bike is now seriously fast.
It has more power everywhere, & just screams at top-end!
Very few teething issues so far, & Willykiller has kept tabs on my progress, with jetting & tuning recommendations to ensure I do get the best from it.
I have just spent the holiday weekend here at the dunes at Ahipara.
There is a 350ft high dune there that is as steep as sand will sit, I got airtime at the top, & that takes some grunt to do that!
Will be interesting to see what the dyno has to say!
-
Well biotches!
76HP
Dyno guy was very impressed!
dyno charts to follow, the rpm scale is a bit out, but this thing has got some serious stomp!
-
Well biotches!
76HP
Dyno guy was very impressed!
dyno charts to follow, the rpm scale is a bit out, but this thing has got some serious stomp!
wow! thats a 660? solid!
-
Well biotches!
76HP
Dyno guy was very impressed!
dyno charts to follow, the rpm scale is a bit out, but this thing has got some serious stomp!
wow! thats a 660? solid!
Will probably kick the ass of every other 660 or 700 in NZ!
& a pretty good number in your part of the world too I suspect
-
wow I'm impressed DragonZ
:clap:
way to not be a sell out... :lol:
-
wow I'm impressed DragonZ
:clap:
way to not be a sell out... :lol:
:rofl:
and damn, not sure how I missed this.. Those are STELLAR numbers!!!!!!!!!!!!
-
Hit the beach for a quiet run on Sunday, get through xmas with the family, then off to Ahipara for 10 days serious thrashing!
-
3 plugger....
what dragonz named his favorite sheep
:dragonz:
-
3 plugger....
what dragonz named his favorite sheep
:dragonz:
Jealousy will get you nowhere!
Actually my favourite sheep is named christmas roast.
It will probably have it's throat cut tomorrow, butchered, & into the freezer!
Nothing like fresh home-grown meat!
-
3 plugger....
what dragonz named his favorite sheep
:dragonz:
Jealousy will get you nowhere!
Actually my favourite sheep is named christmas roast.
It will probably have it's throat cut tomorrow, butchered, & into the freezer!
Nothing like fresh home-grown meat!
lol
-
my FAVORITE way to spell FAVORITE is the hetro-sexual way... without the U
:shrug:
-
my FAVORITE way to spell FAVORITE is the hetro-sexual way... without the U
:shrug:
Stop this off-colour posting
-
Hefe,
just for you:
http://oxforddictionaries.com/definition/english/favourite?q=favourite (http://oxforddictionaries.com/definition/english/favourite?q=favourite)
They even translate it into American, just for you strange people :P
-
Hefe,
just for you:
http://oxforddictionaries.com/definition/english/favourite?q=favourite (http://oxforddictionaries.com/definition/english/favourite?q=favourite)
They even translate it into American, just for you strange people :P
I already lost this battle :lol: backwards ass language!
-
Hefe,
just for you:
http://oxforddictionaries.com/definition/english/favourite?q=favourite (http://oxforddictionaries.com/definition/english/favourite?q=favourite)
They even translate it into American, just for you strange people :P
Just like you peeps across the pond with your damned AluminIUM....... :lol:
-
Hefe,
just for you:
http://oxforddictionaries.com/definition/english/favourite?q=favourite (http://oxforddictionaries.com/definition/english/favourite?q=favourite)
They even translate it into American, just for you strange people :P
Just like you peeps across the pond with your damned AluminIUM....... :lol:
leaving letters out of the name, doesn't make the part weigh any less.