RaptorSource.com
Raptor 700 Information => 700 Maintenance => Topic started by: hazlettXx on May 22, 2010, 10:07:13 AM
-
went to change my oil today and the bolt is snapped pretty crazily, now i didnt do it - the original owner must have.. think I can find a big enough alan wrench to fit in there? any other suggestions
IMAG0042 on Flickr - Photo Sharing! (http://www.flickr.com/photos/hazlettxx/4629559438/)
IMAG0040 on Flickr - Photo Sharing! (http://www.flickr.com/photos/hazlettxx/4629558540/)
also once i get it out im going to buy a replacement OEM one (anyone know if part number 1S3-15189-00-00 is the replacement one?)
-
talk to steve at TQS, He has magnetic replacements that uses a 12mm head. Makes it nice because then the oil tank and case drains are the same size.
-
talk to steve at TQS, He has magnetic replacements that uses a 12mm head. Makes it nice because then the oil tank and case drains are the same size.
Are you sure they are? I know mine takes 2 different sizes...or are the thread sizes the same?
-
i got it out, can anyone tell me if 1S3-15189-00-00 is the right part number for a replacement?
-
i got it out, can anyone tell me if 1S3-15189-00-00 is the right part number for a replacement?
That's the guy you're lookin for. If you don't have an allen the correct size you could do like I do for the crank big allen cover on the left side of the case. I took a bolt head that fits in there and then double nutted the bolt and use that to get it on/off. :) way cheaper than buying 1 allen wrench.
-
http://www.boats.net/parts/detail/yamaha/Y-1S3-15189-00-00.html
Yup crankcase plug
-
Thanks for all the help fellas. :thumbs: Going to try to find a place that has it on stock and hopefully my tires come in by Friday so i can go ripping.
-
good luck mate! :thumbs: