RaptorSource.com

!------VIP MONTHLY GIVE-AWAY------! => Monthly Give-away!!!! => Topic started by: socalrappy700 on January 07, 2009, 08:00:38 AM

Title: January VIP prize: Barker Performance CNC head!
Post by: socalrappy700 on January 07, 2009, 08:00:38 AM
Sorry for the delay everyone, I have been on vacation the past week.  But the January VIP prize is up and running!   :clap:

(http://barkersexhaust.com/images/logoSig.gif)

Barker Performance has hooked us up with a stage one CNC head for the Raptor 700. It will come with  valves(ferrea),ferrea spring kit.  This is an amazing piece of craftsmanship and will be a great modification to whoever wins. 

Just reply with the words "I'm in' And you'll be set to go!

-RaptorSource.com
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: zx10r203 on January 07, 2009, 08:04:45 AM
I'm in!!
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Magz on January 07, 2009, 08:10:51 AM
I'm in
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: ctateusa on January 07, 2009, 08:19:33 AM
ahh man  stupid 700s :'(
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: cowtownup on January 07, 2009, 09:12:01 AM
I'm in
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: r00st on January 07, 2009, 09:36:12 AM
I'M IN!

Thanks yet again for the prizes...this forum rocks!
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: fireman5166 on January 07, 2009, 09:39:51 AM
im in  :thumbs:
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: vader/sith on January 07, 2009, 09:44:22 AM
I'm In    :grin_nod:
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: gr8ride4u2luv on January 07, 2009, 10:06:12 AM
I'm In!
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: dabigbratj on January 07, 2009, 10:06:44 AM
I'M IN!!!
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Onelunglow on January 07, 2009, 10:40:22 AM
I'm in
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: tuffguy on January 07, 2009, 10:54:15 AM
I'm in.
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Sand84 on January 07, 2009, 12:04:10 PM
I'm in
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: preddy08 on January 07, 2009, 12:44:28 PM
IN!
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: air on January 07, 2009, 12:51:07 PM
I'm In
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Colorado700R on January 07, 2009, 01:01:35 PM
I'm in
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Kamakazi on January 07, 2009, 01:03:29 PM
im in
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: double06 on January 07, 2009, 01:47:00 PM
Crayola me in!   :thumbs:
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Peelz on January 07, 2009, 02:15:53 PM
I'm in

but... how bout some love for the 660's next time. :thumbs:  ;)

for me and ctateusa :lol:
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Buck on January 07, 2009, 03:36:06 PM
I'm in.
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: dgreenbluet on January 07, 2009, 04:03:27 PM
I'm in.
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Colorado700R on January 07, 2009, 04:03:38 PM
Mad Dog is In!!
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: wobble on January 07, 2009, 04:41:03 PM
I'm in
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: SUBZERO on January 07, 2009, 06:13:36 PM
I'm in! I need some CNC luv.
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: russ-russ on January 07, 2009, 06:20:04 PM
I'm in.  If I win, I'll make somebody a good deal for my Bo ported head, their stocker plus a little cash.  Hate to see a good head go to waste.
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Gunz on January 07, 2009, 07:10:11 PM
Im in
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: DL700 on January 07, 2009, 07:15:31 PM
I'm in
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: NaturalRaptor on January 07, 2009, 08:10:59 PM
I'm in
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: 99f250 on January 07, 2009, 09:27:01 PM
I'm In
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: powder coater on January 07, 2009, 09:31:59 PM
I'm In
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: machelis on January 07, 2009, 11:27:42 PM
I'm in.
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: UncleBeaner on January 07, 2009, 11:54:21 PM
FERK it im in if i win it will go to sharty
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: bigbullseye78 on January 08, 2009, 01:00:10 AM
i'm in
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: SprinterX on January 08, 2009, 03:46:54 AM
I'M IN     :clap:
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: ctateusa on January 08, 2009, 07:24:58 AM
Im in too I guess.  Ill donate it for another auction or swap it to someone for something good for mine. :clap:
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Mtneer Man on January 08, 2009, 10:43:39 AM
IM IN
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: 11Raptor on January 08, 2009, 05:25:03 PM
I'm in
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: sandaddy on January 08, 2009, 06:53:06 PM
I`m In !!  :clap:


Title: Re: January VIP prize: Barker Performance CNC head!
Post by: RaptorRandy on January 08, 2009, 11:07:06 PM
I'm in  :thumbs:
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: YamahaRaptor0206 on January 08, 2009, 11:33:24 PM
Seeing how i didnt win last month
IM IN
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: fire raptor on January 09, 2009, 01:26:28 PM
Can i get in? if so im in.
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Colorado700R on January 09, 2009, 01:28:23 PM
Quote from: fire raptor on January 09, 2009, 01:26:28 PM
Can i get in? if so im in.

Ofcourse  :thumbs:
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Peelz on January 09, 2009, 02:58:03 PM
Quote from: fire raptor on January 09, 2009, 01:26:28 PM
Can i get in? if so im in.

NO

 :lol:
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: realdeal on January 09, 2009, 08:36:43 PM
im in
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Busby on January 10, 2009, 12:41:44 PM
I'm in
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Texas700 on January 10, 2009, 05:27:28 PM
i'm in.
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: dick-84 on January 11, 2009, 01:46:35 AM
IM IN!
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: powder coater on January 11, 2009, 09:06:02 PM
I'm In
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: tonto13 on January 11, 2009, 10:42:41 PM
I,m in!
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: terb on January 12, 2009, 09:28:23 AM
I'm In.
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: NeverEnough on January 12, 2009, 09:36:45 AM
Im in
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Segkast on January 12, 2009, 06:56:49 PM
I'm in  :jaw:
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: ceanern on January 12, 2009, 08:35:15 PM
I'm In!
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: 98sporttj on January 13, 2009, 05:56:29 AM
i am so in on this  :clap:
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Bert on January 13, 2009, 12:50:49 PM
I'm In
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: lowridin88 on January 14, 2009, 02:33:25 PM
iM IN!
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: MrStevie on January 15, 2009, 07:07:33 PM
I'm in
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: mustangracer42 on January 16, 2009, 09:32:11 AM
I'm IN!!!!!!!!!!!!
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: CyNIck on January 19, 2009, 02:27:28 PM
I'm in Too. :)
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: poolboytoo on January 21, 2009, 11:57:08 AM
im in
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Oilfield_Mafia on January 21, 2009, 12:05:57 PM
Im in!  Thanks for the chance RaptorSource.com!
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Hefe on January 21, 2009, 03:34:43 PM
oh yea.. count me in!
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: desdak4 on January 22, 2009, 06:51:13 PM
I'm in.

Thanks guys,
Jay
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: rutcutter on January 22, 2009, 11:20:24 PM
I'm in
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Troy31 on January 23, 2009, 04:13:22 PM
I'm in
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: MrStevie on January 23, 2009, 06:43:00 PM
I'm In
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: poolboytoo on January 24, 2009, 11:32:34 AM
I'm In again
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Peelz on January 28, 2009, 06:29:17 PM
I'm in

(just reminding ya' with the new name)  :rofl:

This giveaway just took on a new meaning for me. :grin_nod:
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: SULLY0556 on January 30, 2009, 05:47:13 AM
  I'm in,   Hope I"m not too late.  :)
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Oilfield_Mafia on January 31, 2009, 02:46:28 PM
Today is the last day for entry! Cant wait to see who wins!  :clap:
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Colorado700R on February 01, 2009, 09:51:34 AM
Drum Roll please :grin_nod: :grin_nod: :grin_nod:...................
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Gunz on February 01, 2009, 11:07:30 AM
(http://www.stranger-things.net/forum/images/smilies/drumroll.gif)
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Oilfield_Mafia on February 01, 2009, 11:41:26 AM
Need some Popcorn!  :P
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: socalrappy700 on February 01, 2009, 03:33:17 PM
And the winner is..............


R00st!!!!

Congratulations!

~Socal
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Oilfield_Mafia on February 01, 2009, 05:18:39 PM
Congrats ROOst! :thumbs:
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Gunz on February 01, 2009, 06:50:33 PM
Congrats :thumbs:
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: RaptorRandy on February 01, 2009, 08:09:07 PM
Congratulations  :thumbs:



:beer:


Randy
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: cowtownup on February 01, 2009, 08:35:50 PM
PHUUUUUUUUUUUUCK........
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: poolboytoo on February 01, 2009, 09:36:31 PM
 :'(
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: BRAD on February 01, 2009, 10:02:42 PM
Congrats on the win man
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Krandall on February 01, 2009, 10:47:16 PM
Congrats man!!!!!!!!  :clap: :clap: :clap: :clap: :clap: :clap:
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Peelz on February 01, 2009, 10:49:04 PM
congrats roost!  :thumbs:
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: dabigbratj on February 01, 2009, 11:07:33 PM
congrats man looks like you will be building sooner then you though lol :clap:
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: 11Raptor on February 02, 2009, 04:15:22 AM
congrats man  :thumbs:

Michael
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: r00st on February 02, 2009, 06:30:48 AM
Thanks for the text Jake about winning... My auto-response for this thread didnt email me lol.

But... I'll TAKE IT! :)

*does a little happy dance*

This forum Rocks!..seriously...thanks!!!!

Now I need to scrounge up some money for the new build. I was planning on Next winter...not next week but Im not complaining   :jaw: 
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Krandall on February 02, 2009, 07:24:48 AM
Happy Dance!

(http://www.surrogacy.org.uk/discus/clipart/dance2.gif)
(http://www.surrogacy.org.uk/discus/clipart/dan-men.gif)
(http://www.surrogacy.org.uk/discus/clipart/59.gif)
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Oilfield_Mafia on February 02, 2009, 07:41:22 AM
We gonna see a build thread with this bad ass new head right? :grin_nod:

Congrats again!
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: r00st on February 02, 2009, 03:19:20 PM
Well it wont be a build thread like some of you sand dune dwelling west coast guys do... but I think it will be plenty potent for the midwest trails :)

I want to stay stock bore for now, as I plan to throw a crank in next winter (dont want the down time to do it now, since riding season is a month or so away).

I do plan to add:
11:1 piston (be it diamond.. or CP...maybe JE)
+3 TB
FCI in box
If Tim has a good cam that provides all over power I will consider that, otherwise the KDS RJ cam, or Stage III Hotcam if I run into time/money issues.
Have DL700 do a custom curve
And hopefully get it on a dyno to get a map made so im not trying to Half A$$ one myself!

Thanks so much to Tim for being a sponsor, this forum and all its members and Mods for making this forum the best on the net!!! (And im not just saying that because I won something..lol)
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: YamahaRaptor0206 on February 02, 2009, 05:30:14 PM
DAMN! ok whats the give away for February??????? :thumbs:
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: fire raptor on February 03, 2009, 03:06:54 PM
Congratulations. I know where one of your buddies can get a good deal on a full build. They have until Feb 15th. Enjoy your new found speed.Fire Raptor.
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Onelunglow on February 03, 2009, 04:47:45 PM
 :cheers:
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: r00st on February 03, 2009, 05:01:52 PM
I have been eyeing the auction thread fireraptor (which by the way was very generous of you!)

As of now I am planning:
11:1 piston (diamond or CP)
KDS "rj" cam (smaller one)
Beehive springs
+1 valves in the cnc head of course  :clap:
+3 TB

And probably the new rocket factory "worlds largest in box intake" that is on sale for like 129 :)

Should be a pretty sweet budget build! Tim is being super helpful, as usual!
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Bert on February 05, 2009, 07:36:01 AM
rOOst

Where can I find the last 2 items in your sig?
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: r00st on February 05, 2009, 08:42:34 AM
Autozone...just make sure to take a lot of cash with you....those items are spendy! ;)
Title: Re: January VIP prize: Barker Performance CNC head!
Post by: Bert on February 05, 2009, 04:45:39 PM
Thanks  :thumbs:

Congrats as well  :clap: