I also reset the tps. I loosened my throttle blade screw and backed it all the way out till the tps went to .50v and no less. Screw the cold idle screw out 5 turns and reset tps to .68v. Start it up idle to low, left cold idle screw and screw in the idle screw on the butterfly to get 1700 rpms. Shut the motor and re-adjusted the tps to .68v.
I did a little playing tonight on the idle issue i have and found that the % throttle is at its lowest 2% bouncing into 3 sometimes. Is this normal or should it read 0% throttle idling.
Thats when I noticed the 2%throttle angle. So I just closed the shop and decide to post to all you wonderful gurus of 4 wheeler. Let me know if this is ok not. I did change some of % of fuel in the 2% column and it seemed to smooth out the idle some and the idle speed come up.
But my main ? is about the % of throttle idling. Thanks